ECOTAZ ECO Fuelsystems Fuel Enhancers - Does it work?

Next Tankstop,559 miles.,83.093 gallons,6.727 mpg,speed 70-75 mph,

 

This is Funny! However with $530.00 in her pocket SHE may just Have one Heck of a Steak Dinner with an Ice Cold Chilled Beer for You and a Bottle of wine for her, waiting for you when you get home. THEN SHE REALLY WILL GO SHOPPING!!!!!!!
Drive Carefully Guys! God Bless You All!

 

Thanks Gerardo, even driving into head wind and accelerating a little bit there, you are still getting 5% savings. This reading @ 6.727 mpg minus at best before ECO @ 6.4 mpg equalls .327 increase. / .327 divided by 6.4 equalls .051 percent increase. $3.99 per gallon times .051 percent equals a 20 cents per gallon savings. or .031 cents per mile savings which is $77.50 savings on 2500 miles
Keep us posted Gerardo!

 

Thank you gerardo1961 for all your posts. Any other testers have any results yet? gerardo1961, how much weight do you normally haul?

 

[gerardo1961, how much weight do you normally haul?[/QUOTE

Now I have 20000,never I have the same weight,I like more this is better for my truck and for my money,right know iam happy with my mpg,the engine run very very good,

 

Before when I was driving with a lightload from Ca-to eastcoast I was happy when I pass a little over 6mpg,right now iam more close to 7 ,and this every fill,

 

still trying to figure out how i can get a hold of the fittings to both ends on my test unit. No brass compression fittings around that can fit my engine (cummins n14). I went to a local truck shop but they dont have the reducer fittings. The ones I got, the threads are not compatible. Any suggestions. Did ecotaz get my PM. Any fittings for the cummins n14 out there?????? No modifications on the fuel pump. (OEM)

 

I received your PM and asked if you could send a pic of your fuel filter. This way I can see what you have. I will just send the kits we use for the N-14's and let you pic the one you need. Do you know if you have a JIC #10 fitting coming off of the fuel filter or is it the Bosch quick disconnect?
If you will please go to www.etieco.com and click on Installation Kits.
It is on the lefthand side of our home page just above Warranty. It should be the 001 kit or the 009 kit. Please let me know here or PM or e-mail me.
ECOTAZ