Truckers Report Jobs

Find Trucking Jobs

Company Driver Company Driver Dry Van Dry Van Flatbed Flatbed Refrigerated Refrigerated Specialized Specialized Owner Operator Owner Operator
More Trucking Job Searches ⌄ Fewer Trucking Job Searches
⌃

'00 KW T600. Blink code button.

Discussion in 'Trucks [ Eighteen Wheelers ]' started by Pablo-UA, Nov 21, 2011.

  1. Nov 21, 2011 #1
    Pablo-UA

    Pablo-UA Road Train Member

    7,604
    1,642
    Oct 11, 2010
    Borispol, Ukraine
    0
    There is the big rig with Celect Plus. The priblem is that driver can't pull blink codes becouse we cant find this magic button. There is ABS test button, but no engine test! so where to look for?

    and no shutdow override button!!!!
     
    Pablo-UA, Nov 21, 2011
    Pablo-UA, Nov 21, 2011
    #1
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. Nov 21, 2011 #2
    Pappa Bear

    Pappa Bear Light Load Member

    105
    22
    Dec 20, 2010
    Springfield, OH
    0
    try turning the cruise off. Turn the key on and hit resume on the cruise... I think. Or some variation of that.
     
    Pappa Bear, Nov 21, 2011
    Pappa Bear, Nov 21, 2011
    #2
  4. Nov 21, 2011 #3
    w900

    w900 Light Load Member

    83
    27
    Mar 25, 2009
    Carlisle,Pa
    0
    Mine was a black toggle switch(the same type used on dash for lights etc) under dash below keyswitch. It wasn't on kickpanel but on the underside of dash next to receptacle that shop would plug in hand held readers
     
    w900, Nov 21, 2011
    w900, Nov 21, 2011
    #3
  5. Nov 21, 2011 #4
    Pablo-UA

    Pablo-UA Road Train Member

    7,604
    1,642
    Oct 11, 2010
    Borispol, Ukraine
    0
    no! not working. when I hit this switch CEL is off and no codes!!!! I can read codes with Insite software!!!

    As I know B21 pin is blink code mode 5V input. According wiring diagram there is diagnostic plug somewhere...

    seems to me if I cant find it, I'd add switch and run 5V supply wire from cruise control switch and run wire to B21 pin on ECM
     
    Pablo-UA, Nov 21, 2011
    Pablo-UA, Nov 21, 2011
    #4
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.