Which CB to Buy and watts

Discussion in 'CB Radio Forum' started by 14er, Apr 16, 2012.

  1. marrowbone boy

    marrowbone boy Bobtail Member

    35
    8
    May 1, 2012
    Pikeville Kentucky
    0
    If you can spend 300 to 700 on a radio I recommend the best radio money can buy. Ranger RCI 2970 DX or!!! Ranger 69fc4. The fc4 will do close to 400 watts. No amp needed and it covers 10 11 and 12 meters! No you dont use those channels alot but if you get board you can take the 400 watts it produces and talk skip with the best of them above 40 or below 40. The 2870 DX or 2970 N2 are the same as the 69ffc4 but only do 150 plus watts. Sure 150 watts is alot but not 400! I have been into CB radio and ham for over 20 years and trust me what I say that these radios are the best money can buy and so to them being built by the best they sound better and work as far as the cheaper radios with 500 plus watts behind them. Take this advice in stride my friend. You cant go wrong. 2970DX is 325.00 new to 200 used. The 69ffc4 is 650.00 new to 450.00 used. Both worth the money by far!
     
    14er Thanks this.
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. WA4GCH

    WA4GCH Road Train Member

    3,324
    577
    Aug 12, 2009
    Seminole Florida
    0
    :biggrin_2556: 400 watts :biggrin_2556:

    The 40 below ( 24.890 - 24.990 mhz ) and above ( 28.000 - 29.700 mhz ) :biggrin_25513: i think .......
     
    14er Thanks this.
  4. 14er

    14er Bobtail Member

    42
    1
    Apr 8, 2012
    Micco, Florida
    0
    Does the 400 w come from the Mic, because when I read this it says 150 w from the unit. Not that I claim to understand alot of this but am asking for clarification.

    RCI-2950DX & RCI-2970DX Specifications
    General
    RCI-2950DX & 2970DX
    Frequency Range
    10 Mtr: 28.000 - 29.6999 MHz
    12 Mtr: 24.8900 - 24.9900 MHz
    Tuning Steps
    1 MHz, 100 KHz, 10 KHz, 1 KHz, 100 Hz
    Emission
    USB, LSB, CW, AM, FM
    Frequency Tolerance
    0.005%
    Frequency Control
    Microprocessor / Phase-Locked-Loop Synthesizer
    Frequency Stability
    0.001%
    Operating Temperature Range
    -10 ºC to + 50 ºC
    Meter Function
    RF Output, RX Signal Strength, Modulation, SWR
    (LCD Display Indicates Relative Values)
    Antenna Impedance
    50 W
    Input Voltage
    13.8 Vdc
    Microphone
    400 W Dynamic PTT - 6 Pin
    Size (W x D x H)
    2950DX - 7" x 10" x 2-3/8"
    2970DX - 7" x 9" x 3-7/8"
    Weight
    2950DX - 4 lb 3 oz
    2970DX - 7 lb 6 oz
    Shipping Weight
    2950DX - 7 lb.
    2970DX - 11 lb
    Transmitter
    RF Power Output
    RCI-2950DX - 10 Watts RMS: CW / AM / FM
    25 Watts: SSB (PEP)
    RCI-2970DX - 50 Watts RMS: CW / AM / FM
    150 Watts: SSB (PEP)
    Current Draw @ Full Power
    RCI-2950DX - 4.8 Amps
    RCI-2970DX - 18 Amps
    Modes
    USB, LSB, CW, AM, FM, PA
    CW Keying
    Semi break-in
    Carrier Suppression
    - 50 dB
    Spurious Emission
    - 50 dB
    Antenna Connector
    UHF Type, 50 W
    Receiver
    Sensitivity
    AM / CW: 0.5 µV for 10 db SINAD
    FM: 0.25 µV for 12 db SINAD
    SSB: 0.15 µV for 10 db SINAD
    Selectivity
    - 55db
    Image Rejection Ratio
    - 65 db
    Audio Output Power
    2.5 Watts @ 10% THD into 8 W
     
  5. rollingradios

    rollingradios Light Load Member

    184
    66
    Mar 9, 2012
    Richmond, Va
    0
    What vehicle is it going in?
     
  6. WA4GCH

    WA4GCH Road Train Member

    3,324
    577
    Aug 12, 2009
    Seminole Florida
    0

    Is this a new CB band :biggrin_25513:
     
  7. 14er

    14er Bobtail Member

    42
    1
    Apr 8, 2012
    Micco, Florida
    0
    it will be installed in a 386 Pete
     
  8. 14er

    14er Bobtail Member

    42
    1
    Apr 8, 2012
    Micco, Florida
    0
    I do not know maybe Marrow can assist
     
  9. marrowbone boy

    marrowbone boy Bobtail Member

    35
    8
    May 1, 2012
    Pikeville Kentucky
    0
    Ifyou read the post correctly you would see that it stated the 2970DX does around 200 and the 69FFC4 does 400. Both these specs are after a peak tune and realignment that can be done by the accredited seller. The radios can also be converted to 11 meters by clipping 1 wire or adding a $3.99 part and this can also be done before it is shipped by the seller. If you look online for Free Banding Freqs you will see that the FCC has opened up alot of the 10 and 12 meter bands for use buy the average CB user do to these bands no longer being used by liecened operaters. You can try to discredit me all you like but this is my main hobby and I know what I am talking about. I own 7 Ranger RCI radios and there the best money buy under the Main HF rigs like Icom, Kenwood, Yaesu and so on. There is a little thing at the top right of the screen that says Google on most computers. If you try to use this function more effectively you will find out in the end that you maynot sound as intelligent as you actually are!
     
    14er Thanks this.
  10. 14er

    14er Bobtail Member

    42
    1
    Apr 8, 2012
    Micco, Florida
    0
    Oh, I hope you don't think I am trying to discredit you. I know about a Cobra 29 and that was from the late 90s thats why I started the tread so that I could learn alot. Sorry if my questions made you feel as I as questioning your knowledge.
     
  11. marrowbone boy

    marrowbone boy Bobtail Member

    35
    8
    May 1, 2012
    Pikeville Kentucky
    0
    No sweat my friend. It was just the post with questions already answered. I understand your point and question. My answer was just my opinion and in no way reflects on other peoples opinions. From my years of CB radio and now Ham radio I still use the same radios. Tho there not as well made as the much higher costing main line HF rigs I prefer them. Please understand that in no way was I directing the comment at you. I personally have only ever owned 2 29 cobras. They area great starter radio and also the cheapest way to go. As far as quality, I have stated my opinion.
     
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.