Spot on and agree,
Nothing like hauling cross country with a load and have to take the signs on and off, different lights, different flagging, axles up and down.
Nuff to drive a person crazy
Oversize Reference Book
Discussion in 'Flatbed Trucking Forum' started by SHC, Sep 1, 2012.
Page 2 of 3
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
I understand that it would be great to get all the states to agree to eveything and make it all uniform, but I can also understand that 12' wide in Wyoming is alot different than 12' wide in Conn.
SHC Thanks this. -
Besides, how are all the states going to make any $$$ if they all agree on a uniform set of regs. And if they did, the govt would be issuing the permits then most likely and could you imagine the headaches that would cause !!!
-
aiwiron Thanks this.
-
I'd like to know what the standard lane width is on a highway anyways, I'm pretty sure it's smaller than 12' wide, seeing as when I haul 12' wide plate, I have to keep the right side over the shoulder because if I don't, I'm into the left lane. -
According to what I found with a quick search, average lane width on 2 lane roads is 11-12'. The minimum lane width on the interstate system and for most US Hwy is 12'. I have not found the average lane width on the interstate system yet.
-
Something else, in some states you can run 24/7 over 80K with a permit, some states act as if you are hauling a mobile home with just weight.
Some states that are more populated than most allow wide load movement at night with proper lighting and no escorts.
Some states tell you to take off your signs if just over weight, and with no dimensional provisions run normal.
I fully understand that location and conditions all play a part in permit moves, but some standards could be uniform and never hurt a thing.cpape Thanks this. -
-
The sad part is even the states have no clue on how to do it, even routes are so akimbo sometimes I wonder how they do it without more incidents.
Pulling a lowboy with just inches of clearance I have been routed over camel hump RR track crossings, under bridges that was under 10 feet. Yadah, Yadah. -
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 2 of 3