Wiring scematics for 2013 389

Discussion in 'Canadian Truckers Forum' started by Sarabeara, Apr 21, 2013.

  1. Sarabeara

    Sarabeara Medium Load Member

    528
    129
    Nov 6, 2012
    0
    Would anyone happen to have wiring scematics for 2013 389. My running lights keep getting shorted. Had it in the dealership, only to
    have it short on me again. I cant lose it to downtime again right away.
    Any help would be great.
     
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. Prairie Boy

    Prairie Boy Road Train Member

    3,258
    1,914
    Nov 18, 2010
    Edmonton, AB
    0
    How many watts power are you running for these lights?
     
  4. itsneversafe

    itsneversafe Light Load Member

    267
    75
    Aug 16, 2011
    Victoria BC
    0
    Trailer or truck or both?
    Look to see if they wired the rev guard or any Titan gauges into the circuit. Auto greasers etc. because those wires run everywhere installers love to poach them and tap them for power. Even qualicom units do it.
     
  5. Sarabeara

    Sarabeara Medium Load Member

    528
    129
    Nov 6, 2012
    0
    I don't know about the trailer. I've had two sets of trailers hooked to it - and the same thing happens, I'm sure its not the trailers. Both my truck and trailer lights get zonked.
    The dealer replaced both the trailer and truck plugs. Worked for 1/2 day - then as dark was approaching - tail lights were out.
     
  6. Sarabeara

    Sarabeara Medium Load Member

    528
    129
    Nov 6, 2012
    0
    As mentioned to PB, I had two different trailers attached - and they do the same thing. However, I recently had my GPS unit taken out, and a different one reinstalled.
    I will go out - soon as Game of Thrones is over, and have a look to see if i've got two things running to the same connection.
     
  7. Prairie Boy

    Prairie Boy Road Train Member

    3,258
    1,914
    Nov 18, 2010
    Edmonton, AB
    0
    When you said "Running Lights" I was thinking of fog light style lights. Not Marker lights.
     
  8. Sarabeara

    Sarabeara Medium Load Member

    528
    129
    Nov 6, 2012
    0
    :)
    My tail lights dont work. My hazards, my turnlights, my brakelights all work - but my tail lights ae out.
     
  9. Prairie Boy

    Prairie Boy Road Train Member

    3,258
    1,914
    Nov 18, 2010
    Edmonton, AB
    0
    Put a jumper wire at the plug, from the Brown to the Black and give it a try.
     
  10. Sarabeara

    Sarabeara Medium Load Member

    528
    129
    Nov 6, 2012
    0
    I have no power to either one.
     
  11. itsneversafe

    itsneversafe Light Load Member

    267
    75
    Aug 16, 2011
    Victoria BC
    0
    If the fuse is blown you have a short, look to see if they spliced into a wire anywhere for anything. if the use is not blown the relay is screwed, replace the switch and relay
     
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.