Would anyone happen to have wiring scematics for 2013 389. My running lights keep getting shorted. Had it in the dealership, only to
have it short on me again. I cant lose it to downtime again right away.
Any help would be great.
Wiring scematics for 2013 389
Discussion in 'Canadian Truckers Forum' started by Sarabeara, Apr 21, 2013.
Page 1 of 2
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
How many watts power are you running for these lights?
-
Trailer or truck or both?
Look to see if they wired the rev guard or any Titan gauges into the circuit. Auto greasers etc. because those wires run everywhere installers love to poach them and tap them for power. Even qualicom units do it. -
I don't know about the trailer. I've had two sets of trailers hooked to it - and the same thing happens, I'm sure its not the trailers. Both my truck and trailer lights get zonked.
The dealer replaced both the trailer and truck plugs. Worked for 1/2 day - then as dark was approaching - tail lights were out. -
As mentioned to PB, I had two different trailers attached - and they do the same thing. However, I recently had my GPS unit taken out, and a different one reinstalled.
I will go out - soon as Game of Thrones is over, and have a look to see if i've got two things running to the same connection. -
When you said "Running Lights" I was thinking of fog light style lights. Not Marker lights.
-

My tail lights dont work. My hazards, my turnlights, my brakelights all work - but my tail lights ae out. -
Put a jumper wire at the plug, from the Brown to the Black and give it a try.
-
I have no power to either one.
-
If the fuse is blown you have a short, look to see if they spliced into a wire anywhere for anything. if the use is not blown the relay is screwed, replace the switch and relay
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 1 of 2