Truckers Report Jobs

Find Trucking Jobs

Company Driver Company Driver Dry Van Dry Van Flatbed Flatbed Refrigerated Refrigerated Specialized Specialized Owner Operator Owner Operator
More Trucking Job Searches ⌄ Fewer Trucking Job Searches
⌃

Pass door power locks

Discussion in 'Peterbilt Forum' started by Petercar87, May 5, 2013.

  1. May 5, 2013 #1
    Petercar87

    Petercar87 Bobtail Member

    6
    1
    Feb 27, 2013
    Sarnia.ontario
    0
    2011 peterbilt 389 ..passenger door lock is not working. With either the keyfob or the door lock buttons on both doors
     
    Petercar87, May 5, 2013
    Petercar87, May 5, 2013
    #1
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. May 5, 2013 #2
    eeb

    eeb Heavy Load Member

    731
    268
    Mar 24, 2013
    0
    First check the fuse panel, might have separate fuses for right and left doors.
     
    eeb, May 5, 2013
    eeb, May 5, 2013
    #2
  4. May 5, 2013 #3
    eeb

    eeb Heavy Load Member

    731
    268
    Mar 24, 2013
    0
    Had a 379 drivers window quit working, passenger's side still worked. Somebody told me they run on the same fuse, so I start looking at the switch and wiring, finally check the fuse, yup, separate fuse for each side, driver's side fuse blown. Replaced it and haven't had a problem since. Good luck!
     
    eeb, May 5, 2013
    eeb, May 5, 2013
    #3
  5. May 5, 2013 #4
    Petercar87

    Petercar87 Bobtail Member

    6
    1
    Feb 27, 2013
    Sarnia.ontario
    0
    Yu know how both doors have the door lock button on both doors ?...if i use the power burton on both doors the drivers door lock will pop from both doors ..ill check the fuses when i get ti shop and get the fuse panel door with diagram so i know which one
     
    Petercar87, May 5, 2013
    Petercar87, May 5, 2013
    #4
  7. May 5, 2013 #5
    eeb

    eeb Heavy Load Member

    731
    268
    Mar 24, 2013
    0
    The 379 had an aftermarket fuse panel door without a label, I just checked all the fuses and replaced any that were blown. Works good if you don't have access to a diagram.
     
    eeb, May 5, 2013
    eeb, May 5, 2013
    #5
  8. May 5, 2013 #6
    Petercar87

    Petercar87 Bobtail Member

    6
    1
    Feb 27, 2013
    Sarnia.ontario
    0
    There is only one fuse for door locks and another for windows. ...so i guess ill pull the door panel off
     
    Petercar87, May 5, 2013
    Petercar87, May 5, 2013
    #6
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.