Post your flatbed load pictures here
Discussion in 'Flatbed Trucking Forum' started by the gambler, Dec 8, 2011.
- Thread Status:
- Not open for further replies.
Page 577 of 785
-
SHC, passingthru69 and Clasix1055 Thank this.
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
Ok...why did you throw your strap that high lol
-
Good thing it wasn't a wet strap.
-
Sent from your local FBI Surveillance Van -
-
I could use that on my front yard
Sent from your local FBI Surveillance Van -
I know you move a lot of rough terrain cranes, any tricks for hauling them ? I have to move a pettibone 68k one tomorrow -
ThatFlatbedGuy2013, Logan76, MJ1657 and 1 other person Thank this.
-
How long of a well do you have that your loading the rt. crane on?
Grove and Terex do not balance out well for weight dist.
Meaning the boom end will be heavier on the rear.
With the Terex 555 I have to open my trl. 3 feet and have the rear of the crane right up to my neck. But I have a stretch so my rear end of the trl. is a little heavier.
There should be a center mark on the crane.
Put it just a little forward of your center point for weight dist. and go weigh it.
Cross chain and then also straight chain the unit. It will bounce some on your deck. Rough roads just drive a little slower. You do not want to get it bouncing. Easy way to snap chains.
I would go with at least 8 1/2 inch chains. -
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 577 of 785
- Thread Status:
- Not open for further replies.