Post your flatbed load pictures here

I carried around snaps for 6 months and used them once .... Just like my pipe stakes they are free to a good home if you stop in Toledo ... Right now its just rattling around in the back of my pickup

 

Ill be in Perrysburg later this week, don't need them, just holler if you see me

 

JDP, Is thaat boom for a 850 model?

fisher guy, no problem, I was wondering if the wheel well was in the way.

 

Im still down so if you see a guy waving his arms like an idiot don't run me over

 

Going to Dans truck equipment

 

I feel that the safety binders are not good for wheeled equipment. Too much bounce and flex in the tires and suspension that causes the binders to pop loose. I still have 12 of them but they never get used. I wouldn't give up my durabilit ratchets for anything else !!! Just have to be careful because its easy to damage the product and trailer if you go too much on them.

 

I'll take the pipe stakes!!!

 

You can have em

 

Found a few on my phone when I drove for Roehl, the loader went to east Texas the header went to Illinois and the bush-hogs went to Kentucky and the limestone boulders went to Wisconsin.

 

Sure is. Big machine when the boom alone w/o the stick weighs about 25k. I snuck out of the office today to go haul some local moves for a new customer. My journeys took me to JD where they had an 870 (the model that replaced the 850) sitting outside the experimental shop. Operating weight comes in a hair shy of 200k.