They do need to be 5vdc/2amp output cords. The RM cords are build differently at the DC end for day/night power control also.
If you still have the old cords let me know. I would like to get them to the Eng dept.
Thanks,
Mark
Suppport Thread for the TND 500, TND 700 or future Rand McNally products.
Discussion in 'Trucking Electronics, Gadgets and Software Forum' started by Mark Kling, Apr 16, 2010.
- Thread Status:
- Not open for further replies.
Page 590 of 756
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
Temple,Tx
Wilsonhart Dr is supposed to be 'Wilsonart Dr'
Like the Company, they make Tiles and Stuff.
Cross Streets Wendland Rd and Lucius McCelvey Dr on the other End.Mark Kling Thanks this. -
Mark, this is an answer to your question from the other thread about my LED light blinking green / red rapidly. Yes, it does it with the AC cord too. The USB hole one the unit seems loose or something. If I hold th USB end in with pressure and a slight upward cant, it stops blinking and goes solid, as expected. It's still under warranty I think, and I bought it from Dieselboss, who has a good return policy too, I think.
-
I still got them. Tell me where to send them -
Contact DieselBoss for an return.
Thanks,
Mark -
PM me your E-Mail address and I will send you a shipping label.
Thanks,
Mark -
All of the pins are visible and flush. It does not show connected. Tried multiple cables. -
Let me clarify... If over 30 days from any dealer you will have to go through Rand Support for warranty.
If you bought from DieselBoss and you do not have a receipt, DieselBoss can provide that.
Thanks,
MarkDieselboss Thanks this. -
Enlighten me again to the original issue. Saves me having to go back pages to find the post.
Thanks,
Mark -
TND 710 will not connect to computer.
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 590 of 756
- Thread Status:
- Not open for further replies.