Truckers Report Jobs

Find Trucking Jobs

Company Driver Company Driver Dry Van Dry Van Flatbed Flatbed Refrigerated Refrigerated Specialized Specialized Owner Operator Owner Operator
More Trucking Job Searches ⌄ Fewer Trucking Job Searches
⌃

high flow t600 muffler

Discussion in 'Trucks [ Eighteen Wheelers ]' started by dieseldan2005, Jun 28, 2013.

Page 2 of 2
  1. Jul 28, 2013 #11
    dieseldan2005

    dieseldan2005 Light Load Member

    185
    17
    Feb 6, 2009
    North Branch, MN
    0
    Good info. How did you shorten the bands superhauler? Which end did you shorten from? They are very fragile and one of my t-bolts somewhat pulled out of the end of the band when i was taking them apart. I was able to get it all back together.
     
    dieseldan2005, Jul 28, 2013
    dieseldan2005, Jul 28, 2013
    #11
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. Jul 28, 2013 #12
    Superhauler

    Superhauler TEACHER OF MEN

    12,209
    100,723
    Jan 30, 2010
    keep stroking.
    0
    if I remember right the end that has the curved pc of metal where the bolt goes through it. that is the end I used. bent the brackets then layed the band over the muffler and seen where to drill the new hole. be careful stainless is brittle. I used a vise to straighten the band before I drilled. I used a little heat from my fire wrench to keep from cracking the band.
     
    Superhauler, Jul 28, 2013
    Superhauler, Jul 28, 2013
    #12
  4. Jul 28, 2013 #13
    dieseldan2005

    dieseldan2005 Light Load Member

    185
    17
    Feb 6, 2009
    North Branch, MN
    0
    How did you detach the band from the main muffler support bracket? On mine its riveted onto the J shape bracket.
     
    dieseldan2005, Jul 28, 2013
    dieseldan2005, Jul 28, 2013
    #13
  5. Jul 29, 2013 #14
    ENR

    ENR Light Load Member

    254
    50
    Oct 8, 2009
    Ontario
    0
    I just shot a couple holes in my existing brackets and used a u bolt clamp to lock the smaller pipe in place. Just toss the stainless straps. Easy.
     
    ENR, Jul 29, 2013
    ENR, Jul 29, 2013
    #14
  7. Jul 29, 2013 #15
    rollin coal

    rollin coal Road Train Member

    12,529
    23,860
    Mar 29, 2008
    TN
    0
    463's dropped right into mine no modification required.
     
    rollin coal, Jul 29, 2013
    rollin coal, Jul 29, 2013
    #15
  8. Jul 29, 2013 #16
    dieseldan2005

    dieseldan2005 Light Load Member

    185
    17
    Feb 6, 2009
    North Branch, MN
    0
    Any chance i could get some pics from you guys as to how your mufflers look installed? Thanks!
     
    dieseldan2005, Jul 29, 2013
    dieseldan2005, Jul 29, 2013
    #16
  9. Aug 4, 2013 #17
    dieseldan2005

    dieseldan2005 Light Load Member

    185
    17
    Feb 6, 2009
    North Branch, MN
    0
    Say ENR, i am still trying to figure out how i am going to secure my muffler. My problem is the brackets on my t6 are cradling the muffler and not the end of the 5" pipe. So i can't find a 10" u bolt that will go around the muffler. If that is what you did, please fill me in on where you found the 10" u bolts.
     
    dieseldan2005, Aug 4, 2013
    dieseldan2005, Aug 4, 2013
    #17
  10. Aug 25, 2013 #18
    dieseldan2005

    dieseldan2005 Light Load Member

    185
    17
    Feb 6, 2009
    North Branch, MN
    0
    Got the new muffler installed finally. Jacking up the brackets seemed to work ok. I only needed about 1.5 inches of height. Turbo sounds better, we'll see if there are any performance gains. I will keep everyone posted. I ended up finding brackets for a 10" muffler at Napa. I just drilled new holes in the existing brackets to the frame.
     
    dieseldan2005, Aug 25, 2013
    dieseldan2005, Aug 25, 2013
    #18
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

    • Page 2 of 2