I am starting flatbed I just bought my trailer with 10'.1" spread how much weight I can pull on my rear axles 20.000 lbs each?
Is this spread good for 48 states? please advise
I am new in flatbeds needs some help
Discussion in 'Flatbed Trucking Forum' started by whitestonetrucks, Oct 4, 2013.
Page 1 of 2
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
Yes, and yes. So long as your gross is under 80k, and you can keep your drives in the neighbor hood of 32k-33k the rest should be fine. I'm not anxious to put "40,000 lbs" on a spread as I don't want any more weight on them then necessary when making tighter turns but it's good to know that if the expected payload weight is in line and the load is "centered" slightly behind the center of the trailer, you should be able to safely run across any scale without worry.
whitestonetrucks Thanks this. -
-
As far as I know, spreads don't have any unique requirement over conventional tandem axle trailers as far as chaining requirements. I believe if snow is serious and drag chains are required you are to chain at least the outside tires on at least one trailer axle in a typical tractor-trailer combination.
whitestonetrucks Thanks this. -
It's good everwhere if it is a 48. if longer kingpin rules come into play.
whitestonetrucks Thanks this. -
Your not planning on running canada then are you?
-
-
Nova Scotia and Manitoba are 2 Provinces I know for sure don't allow a 10'1". Period. Nova Scotia may "see" a 9' and send you on your way. Manitoba will permit you in to deliver to points in Manitoba, but you have to leave empty and no transit-permits.
whitestonetrucks Thanks this. -
-
I think all 4 Western Provinces frown on the bigger spreads. You're good to 37,400lbs on a 54" tandem and 39,600lbs on 72". Given those weights they don't have legal provisions for spreads over 6'.
whitestonetrucks Thanks this.
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 1 of 2