2000 Doonan 50 foot steel step deck for sale

I have a 50 foot Doonan steel step deck, spread axle for sale. It has the 40 foot bottom section and 10 foot top, with an 18 inch king pin stetting. I am the second owner and it has been exceptionally well taken care of. Trailer has no rust, has never been up north, never been painted or blasted and it doesn't need it. Trailer has s wood deck that is in 98% of new condition. It has a manual raise lower valve with an electric dump valve on the back axle. It is rated for 90,000 pounds in a 10 foot area. It has all LED lights with the 4-5-4 pattern across the back. It has all aluminum wheels and tires are 60 percent or better all virgin, no caps, brakes are 60 percent or better as well. It has 3 tool boxes on it, a 60 inch aluminum diamond plate box between the axles on each side, and a 36 inch stainless box toward the front on the curb side. This trailer needs nothing and is ready to go to work today.

This trailer is set up for ramps and has the bracket's welded on the back of the trailer for them. There is a set of 16 foot aluminum Landsport ramps that I will sell with the trailer. They will be extra, and will NOT BE SOLD SEPERATE unless who ever buys the trailer does not want them. They have only been used a few times and are rated for 50,000 total, or 25,000 pounds per axle. One set acts as load levelers. All the hardware and accessory's to go with them will go with who ever buy's the ramps. If you know step decks I probably don't need to explain any more abut them.

This trailer is located about 30 minutes from Mobile, Al.
Price is $15,500 for the trailer
Ramps/load levelers will be $2500 extra

I can not finance and will not take payments or trades of any kind. Don't ask because the answer is NO.

Call 251-989-5359 If someone is interested in a package deal there is also a 2001 48X102 all aluminum Benson flat bed, and a 95 Pete 379 XHD 268 WB with a 63 inch flat top sleeper and a C model Cat (less than 200K on inframe) with a 15 speed, that I can make a package deal on. $10,500 for the Benson and $26,000 for the Pete. I won't sell the Pete until one or both of the trailers are sold. I don't want 2 trailers sitting here, and no truck to pull them with. Can send more detailed pics if any one is serious. Prefer to sell the step deck first.

 

With the ramps all my rigging, tarps, 2 full tanks of fuel and all the B.S. stuff needed to run around with a step deck. Truck and trailer weigh 33,500 pounds

 

View attachment 58127
For the people that are wanting to see a pic of the Pete and the Benson, this is the only one I have saved on my photo bucket. I took a bunch today for Cluck Cluck, I will post them tomorrow, after I transfer them off my phone.