Check the truck side of the trailer plug. This time of yesr they will get severely corroded. I worked on a fleet of 50 T600s, first place I would check.
Trailer lights dim Kenworth T600
Discussion in 'Trucks [ Eighteen Wheelers ]' started by jaisingh, Jan 24, 2014.
Page 2 of 3
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
I have seen bad ground wires cause that exact problem. Either the large white wire is not making connection or the 5th wheel ground cable is broken. Since the problem persists with different cables and trailers Im betting you will find the bad connection in the tractor.
-
Simple test. Run a piece of wire from the frame of the trailer to the frame of the tractor. It will spark when you find conductivity and the trailer lights will be bright.
Purely a ground issue.
Most of the time when this happens, taking a flat blade screwdriver and slightly spreading the prongs on the female 7 way connectors on tractor and trailer alleviate the problem. If that doesn't work, investigate using a different cord. Sometimes, the ground wires inside can fail.
Sorry to say, I think the repair shop ripped you off.KW Cajun Thanks this. -
I'm sure both you & I know there was no question the shop knowingly ripped him off.
If the trailer lights lit up at all, even dim or flickering when he brought it in, that shop knows #### well it wasn't a fuse, let alone an $80 one with $76 labor to install it.
I'd be putting at least $140 worth of hurt on that "mechanic" right about now. -
He said hes already tried different cords and another trailer. The ground strap is useful when the contacts on the cord are a little corroded.
-
-
I never said "in leiu of" did I?. Id rather not get caught at a scale because something goes wrong on the road or I happened to hook to a trailer where somebody didnt bother to maintain tbe ground wire.
-
-
Exactly. Always pays to be prepared
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 2 of 3