Post your flatbed load pictures here

Bayou Hotshot, my buddies razz me about my Freightshaker and Series 60 (its in my Avatar), but to me its kind of like an old Chevy 350. Almost every town has a mechanic who knows how to work on it, and parts are easy to find.

 

I pulled the bridge in lake Charles today loaded at the bottom split top side by the time I hit the top I've done dropped four gears and was at 48mph.. No joke truck pulls good on the bottom end but not rolling top end, my Freightliner split the top end and was over the top.....I just want to drop it off with someone and say fix it I'm not going thru all the BS again

 

get that ecm programmed, my c15 will go over the lake Charles bridge with 45 k on the back and drop to 12th

 

Yeah something is not right at all! You have a pyro? Whats it reading? also what kind of boost are you seeing?

 

See that's why I think something is wrong with mine I talk to mr Haney two weeks ago he told me to check a few things and I've done that just need to do exhaust and fuel pressure gauge after that I'm going to get him to do it.....I'm also using lots of fuel low 4s

 

yep something aint right ,,

 

No EGT gauge yet boot stays around 30 I've seen it at 38 twice but was in lower gears

 

I did a full PM when I first got it so I don't have any miles on this oil when I hit 10,k I'll do a oil analysis.

 

You must have a boost leak. 475hp? My castrated TMC truck was set at 475 with a 13 speed, in 7th over or 1:1 at roughly 1650 RPM it would push 44-45 PSI of boost and pulled like a raped ape!

 

Couple blocks of steel. Get some weight on my butt. With this weather.