What Rate is considered Cheap Freight?
Discussion in 'Ask An Owner Operator' started by Dice1, Mar 30, 2014.
Page 9 of 10
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
He's full of it! Not realistic at all.
-
At the moment I'm getting $3.52 on this 1180 mile trip. Good luck to you in whatever you do.
-
I just finished one paying $3.60 on 900, if you're mindset is $2 a mile is what you want, then $2, or less, is what you'll get...
Do I get hung up on?
Yes.
But, if that load was cheap, then the broker that hung up on me actually did me a favor. I don't like wasting time, and ending the call quickly, when the load is "cheap", is a good thing.
Doesn't really matter to me if I get hung up on, saved me the trouble of hanging up on them.281ric Thanks this. -
-
I've been working exclusively with one CHR agent since the start of the month. This guys office only "owned" one of the loads I booked. I negotiated way over the top rates on 2 loads and the other 6 I accepted at what he offered to pay without counter. I've worked with this agent a lot in the past two years and we get along well. For me it has been pretty average and nothing to get jazzed about that those 8 loads averaged $2.91 per loaded mile to my truck on 2,049 loaded only miles. My typical loaded average at 89% of the gross runs about $3.50 a mile, so CH has really got me, that's ok I'm not mad. Without that 11% off the top that $2.91 a mile is more than $3 per loaded mile what CHR see's that we average. Now, all that said I only needed a couple of great loads then pick off other stuff around those to build on and pull that off. It helps that this agent knows me and likes loading our trucks. It also helps that even if another branch owns the load, I can book it thru him, and he will typically offer a little better rate first offer than the office that owns it will. He does not haggle when I give him well over "we normally move this for" yada yada. I sometimes go to dead areas in my regional runs but not often. Now how is that impossible again? This is just doing typical van freight. It's not impossible to get an over the top rate into a decent or good area. And someone tell me why shedding tears over a great round trip rate to a deadzone is something one should be doing? Not if it paid enough. You guys make this out to be more difficult than it is. I can book myself up for almost a full week like this after a few hours study/inquiry with that agent on various loads.
-
-
This little Midwest regional area is red hot right now. I could easily average $3 a mile on runs of about five hundred miles. If I lived in the Midwest and drove solo I'd just cruise around the Midwest loop, going where the highest bidder took me...
-
I'll add one more thing, I used to go to New England a lot. I liked the rates I could get, and thought that the only time I could get those rates was by going up there. I haven't been to New England since May 2013....
-
Just pull chemical tanks... No looking for lanes or the right broker. It all pays 3.00 to 5.00 a mile gross.. And they almost beg you to take it.
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 9 of 10
Related Categories
-
Waiting on Information on Last...
Siinman posted Dec 24, 2025 at 2:05 PM -
Severe Storm In Los Angeles
WhatsHaulin posted Dec 22, 2025 at 11:29 PM -
Hey Big Truckers, notice many...
TruckDriversDaughter posted Dec 22, 2025 at 10:41 PM -
Recode the cascadia onebox?...
cascadia4life posted Dec 22, 2025 at 9:58 PM -
07 Pete 379 sells for $280,000
JonJon78 posted Dec 21, 2025 at 11:27 AM -
Tablets
Suhenluap posted Dec 20, 2025 at 2:15 PM -
Odometer Rollback Is On The Rise
Tarh331_Dad posted Dec 16, 2025 -
Restriction in Cripple Creek, CO
gekko1323 posted Dec 16, 2025 -
How to adjust injection pump on...
Tbag3 posted Dec 16, 2025 -
Is Landstar worth it
Reefer_driver posted Dec 15, 2025
Loading...
Recent Threads
-
Hotspot vs. tether to phone?
steve-in-kville posted Dec 25, 2025 at 8:19 AM -
Looking for a local driver Chicago
Y-L posted Dec 25, 2025 at 3:10 AM -
Thinking of trying out flatbed
aramil248 posted Dec 24, 2025 at 11:02 PM -
Help with hose type/part# please!
DimengionX posted Dec 24, 2025 at 8:30 PM -
$100,000 Reward
JonJon78 posted Dec 24, 2025 at 2:44 PM -
Waiting on Information on Last...
Siinman posted Dec 24, 2025 at 2:05 PM -
Merry Christmas
tscottme posted Dec 24, 2025 at 11:19 AM -
Jakes engaging lightly in low gears
RepoweredRookie posted Dec 24, 2025 at 10:48 AM -
DT466e No crank scenario,...
alfio posted Dec 23, 2025 at 11:31 PM -
2010 T660 new style leveling valve.
wlhequipment posted Dec 23, 2025 at 10:34 PM
Loading...