Melton, Whatcher 20
Discussion in 'Melton' started by wyndup, Apr 20, 2014.
- Thread Status:
- Not open for further replies.
Page 90 of 157
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
get your detention pay! Or get extended coverage to put you on a different load -
Oh they better pay. Only got 1/4 of the load so only 10000 pounds. Thankfully only a little under 600 miles so I'll get there around 1 this morning take a nap unload then take another nap til ten is up.
-
At the flying J in Ogden Utah. Where every parking stall is a blind side. Luckily I found 2 that were open right next to each other. Made it a little easier. Suns still up and this place is packed
-
At the TA in Denton, TX. First day out. Deliver tomorrow at 8 AM in Carolton.
-
First load?? into Carollton? Oh, bet I know what your PP is going to be tomorrow..
-
-
I suggest getting HazMat, it generally keeps you out of western extrusions. I've been to western extrusions one time, and I've been to GAF 20+ times 60 miles away because they ship hazmat. -
I'm at TA kingman. Supposed to be in LA at 1700. I'll be there around 1200, don't know if they planned on me showing up early, may not get a load out tomorrow. And I have lousy hours coming back for 2 days. I've been out for 5 weeks now and still no 34! Honestly, I've probably had 5 or so 34's out on the road since I've been here.
This load hasn't been fun. I finally got under 80k today. Ran my tanks almost empty, put in 75 gal and scaled again. I was at 79,980. Ran empty again and just put in 80 more. AZ scale should be closed and the CA scale is 250ish miles away, probably could have put more in and been legal when I get there. -
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 90 of 157
- Thread Status:
- Not open for further replies.