Hi All,
I am a new one for this forums. I have some question need help.
VIN:1FVACXCS 4BDBB1117, buid date:11/10. M2-106
1.Key on, I can see BH-164 on the cluster. At the same time, Wiper and washer will non-stop work,even disconnected steering switch connector.
2. open the headlight switch,only left headlight worked.
3. Turn left switch,but right turn light worked.
These problem very strange.If the BHM need be reflashed?
There are two M2 truck with the same problem. Anyone have good advice ?If any one provide the wiring diagram for wiper,turn light and headlight.
Many Thanks.
M2-106 wiper,headlight and turn light problem
Discussion in 'Freightliner Forum' started by owenzhou, Dec 17, 2015.
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
software needs to be updated at Freightliner.
-
-
The M2's have a whole bunch of little square electronic modules that fail all the time. We have one as a dump truck and when they go it does all kinds of weird stuff like the wipers turning on with turn signals and the lift axle going up and down on it's own.
Dealer pin points them pretty quick. -
Attached Files:
-
-
The J1587 MID identifying all BHM information faults is 164. You need to get the SPN ___ FMI ____ to really know what it going on.
-
-
I’ve been dealing with a similar problem. I blink right and it goes left I switch on wipers and it switches back to right. My wipers go off all the time I just unplug them. Today a new issue just started my horn went off randomly. Anyone have any pointers or fixes. Been dealing with this issue for 4 years
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.