DD15 Oil pressure at idle

Discussion in 'Trucks [ Eighteen Wheelers ]' started by Bob.g, Mar 17, 2016.

  1. Bob.g

    Bob.g Light Load Member

    74
    23
    Sep 28, 2015
    0
    I have a 2011 Cascadia DD15 with 620,000 miles and i''m wondering what the oil pressure should be at idle. Mine is around 13 but i'm not sure if it should be that low. Thank-you!
     
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. snowwy

    snowwy Road Train Member

    20,594
    13,315
    Jul 6, 2009
    0
    My engine is still a little cold. Oil temp is 175. Pressure is 25. So i'm gonna say 13 is probably right at 600 rpm and 225 degree oil. my engine is a 2016 with 125k miles.
     
    Grijon and Bob.g Thank this.
  4. Bob.g

    Bob.g Light Load Member

    74
    23
    Sep 28, 2015
    0
    Thank-You. I drove a D60 before and its idle oil pressure was much higher, i changed the oil filter, bearings and a few other things but the pressure stayed the same
     
  5. joe016

    joe016 Light Load Member

    120
    29
    Jan 23, 2016
    0
    I have a mbe 4000 warm up at idle mind is around 15.
     
  6. snowwy

    snowwy Road Train Member

    20,594
    13,315
    Jul 6, 2009
    0
    13 at idle speed 600. 49 at 1500 rpms. Oil at 225 degrees.
     
    Grijon and Bob.g Thank this.
  7. Bob.g

    Bob.g Light Load Member

    74
    23
    Sep 28, 2015
    0
    OK thankyou very much, im getting about 50 psi at 1450
    .
     
  8. skellr

    skellr Road Train Member

    8,735
    12,187
    Jul 17, 2011
    The Village, Portmeirion
    0
    The pressure is low when the motor is warm. Makes you do a double take sometimes.
     
  9. CJndaTruck

    CJndaTruck Road Train Member

    3,349
    3,365
    Nov 21, 2014
    Knoxville, TN (area)
    0
    There is a reason your not suppose to slow idle a DD15. You keep idling like that and you won't have a motor.
     
    Another Canadian driver and Bob.g Thank this.
  10. snowwy

    snowwy Road Train Member

    20,594
    13,315
    Jul 6, 2009
    0
    What would be the reason to not slow idle ??????

    Cuz that's the way FL set the ecm.

    Me personally, use the high idle of 800 rpm. Also set by FL.
    A/C and heater work better should i need the heater.
     
    Bob.g Thanks this.
  11. CJndaTruck

    CJndaTruck Road Train Member

    3,349
    3,365
    Nov 21, 2014
    Knoxville, TN (area)
    0
    You will damage the motor at slow idle. The motor does not circulate oil properly at 600 RPMs. That's why FL says don't do it and why they made a fast idle. Sitting for 2-3 minutes (red light or whatever) but to idle for the night is bad for the motor and will cause premature engine failure.
     
    Another Canadian driver and Bob.g Thank this.
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.