muffler part # anyone know? donaldson or walker?
Discussion in 'Trucks [ Eighteen Wheelers ]' started by rollin coal, May 13, 2016.
Page 3 of 4
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
My guess is Chrome Depot will blow the other guys no's($$$) out of the water. If they do not have what you want more than likely they will give you the part no. Michelle usually answers the phone and is pretty good on most things. If you stump her she turns you over to Bill(the owner) who has been dealing with exhaust stuff for probably 40 years or more. White Motor (White Trucks) probably way before your time, Bill worked at White Motor. Michelle's husband Dean is right on top of stuff too. If you had called before noon on Sat. chances are your problem would be solved. Even if you do not like what they tell you, what did you lose,15 minutes?
-
I'll call them first thing Monday morning Admiral. I'm having to overnight these and figured doing that on a Saturday would be a waste because they wouldn't get here until Tuesday in that case anyway. Which would give me a little time that maybe someone has these mufflers and can post up. I've looked in all of the catalogs. No-one has this free flow 30" overall length muffler with a 10"diameter body (everyone has 9" diameter) with centered 5" inlet & outlet. Only Pitts Power and 4states. Which can't be possible only them? We'll see if Chrome Depot can figure it out and hopefully I can get a fair price.
Last edited: May 15, 2016
-
All the blemished stuff at C.D. comes from Grand Rock so if they make what you want Bill will know about it. I was thinking the same thing on the ship and receive. My name is Ray B. if they ask. Trinity Motor Express. I've been doing business with Bill since he started. He carries those Y pipes too @ a good price. I know you had to get that one asap. Future reference!
-
Donaldson #M090595 is a grand rock #M-595
Standard 5" truck muffler is Donaldson #M100465 (Grand Rock #M-465)
The M100463(Grand Rock #M-130) is the same as M100465 but has less baffling than the M100465. -
Chrome Depot didn't have and couldn't get that size muffler. In fact there wasn't anything to choose from with a 10" body diameter except standard 51" overall length mufflers. He told me about one shoprt one with I think 35" overall length with a 9" body diameter and his price was $129 on that. He told me for a free flow muffler like what they're selling that $162 really wasn't that bad of a price for it. Nobody else has it so no arguing that one. I talked 4states into letting me have them for $162 each matching PittsPower's price. He told me they source the muffler from PittsPower. The guy at Chrome Depot said I'd get a few more years out of it by spraying it with hi-temp bbq paint.
-
Mmmmm. Did someone say BaBaQue.
-
Sorry Bill could not fix you up.
-
No biggie I do appreciate the contact. I'll be happy just to have it back together again so I can get going.
-
Cat motor? Mine came with 10"x51" mufflers from the factory and the pipes came up between the frame rails then curved out and up, braced to the frame at the bottom and some kind of bushed slider type bracket on the back of the bunk. I replaced ALL the brackets, bushings, even the nuts and washers on the stainless slider, never did work right. I ended up putting weed burners on it but still had the 10x51 mufflers on it I chose silent partners because when used in pairs they out flow an Acert by 700 CFM at WOT. All of the flow charts are comparing single mufflers to a single straight pipe, but when you put a y pipe on it you cut the flow requirements for the muffler in half.Just my $0.02. If yours is a Acert and want the short Y pipe for the long mufflers or brackets to make yours work is my vin is 086997
Last edited: May 16, 2016
Reason for edit: Can't keep my mouth shut
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 3 of 4