Truckers Report Jobs

Find Trucking Jobs

Company Driver Company Driver Dry Van Dry Van Flatbed Flatbed Refrigerated Refrigerated Specialized Specialized Owner Operator Owner Operator
More Trucking Job Searches ⌄ Fewer Trucking Job Searches
⌃

Engine codes issues

Discussion in 'Trucks [ Eighteen Wheelers ]' started by djxman, Dec 14, 2016.

  1. Dec 14, 2016 #1
    djxman

    djxman Bobtail Member

    4
    0
    Dec 30, 2014
    0
    I have a 2007 international 9400i with isx and I have 2 fault codes on my dash. When I hook up the scanner it showed
    Sid 27 variable geometry turbocharger actuator #1

    Sid 156 voyage above normal or shortage to high source
     
    djxman, Dec 14, 2016
    djxman, Dec 14, 2016
    #1
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. Dec 14, 2016 #2
    djxman

    djxman Bobtail Member

    4
    0
    Dec 30, 2014
    0
    20161213_091906.jpg 20161213_091906.jpg 20161213_091856.jpg
     
    djxman, Dec 14, 2016
    djxman, Dec 14, 2016
    #2
  4. Dec 14, 2016 #3
    RustyBolt

    RustyBolt Road Train Member

    2,073
    3,334
    Feb 21, 2015
    Bement, IL
    0
    Going to PM you a question. Don't want to derail your thread.
     
    RustyBolt, Dec 14, 2016
    RustyBolt, Dec 14, 2016
    #3
  5. Dec 14, 2016 #4
    Heavyd

    Heavyd Road Train Member

    7,809
    6,260
    Feb 4, 2009
    0
    Engine warning light on, or running problems?
     
    Heavyd, Dec 14, 2016
    Heavyd, Dec 14, 2016
    #4
  7. Dec 14, 2016 #5
    djxman

    djxman Bobtail Member

    4
    0
    Dec 30, 2014
    0
    My check engine light does not come on bulb is good. Only light that comes on is stop engine. Even when you turn the key on.
     
    djxman, Dec 14, 2016
    djxman, Dec 14, 2016
    #5
  8. Dec 14, 2016 #6
    djxman

    djxman Bobtail Member

    4
    0
    Dec 30, 2014
    0
    As far as problems when driving when at higher rpm in let's say 8th gear it's will lose acceleration and the stop engine light comes on for about 5 sec then goes off and 5 seconds later I have acceleration again.
     
    djxman, Dec 14, 2016
    djxman, Dec 14, 2016
    #6
  9. Dec 15, 2016 #7
    Heavyd

    Heavyd Road Train Member

    7,809
    6,260
    Feb 4, 2009
    0
    Ok, you have to be careful with those scanners because they can lead you astray. Your scanner is reporting the VGT with that code, but Cummins code for that same SPN/FMI is the EGR valve out of calibration. This turns on the yellow warning light. The 156 doesn't list as an spn for Cummins at all. I recommend having the codes read by Insite.
     
    Heavyd, Dec 15, 2016
    Heavyd, Dec 15, 2016
    #7
    djxman Thanks this.
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.