Truckers Report Jobs

Find Trucking Jobs

Company Driver Company Driver Dry Van Dry Van Flatbed Flatbed Refrigerated Refrigerated Specialized Specialized Owner Operator Owner Operator
More Trucking Job Searches ⌄ Fewer Trucking Job Searches
⌃

N14 Overhead set help

Discussion in 'Trucks [ Eighteen Wheelers ]' started by rollinsmoke10, Jan 5, 2017.

  1. Jan 5, 2017 #1
    rollinsmoke10

    rollinsmoke10 Bobtail Member

    26
    1
    Oct 11, 2009
    0
    Have an N14 93' serial number 11713479 cpl 1380 N14-350P. Tag on engine says intake .014' exh .027" injector 125" lbs. I believe it is an stc as it has the oil tubes to the injectors. searching the internet there is two different way depending on model of N14. Need help finding correct procedure and special tools if needed. Thanks
     
    rollinsmoke10, Jan 5, 2017
    rollinsmoke10, Jan 5, 2017
    #1
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. Jan 5, 2017 #2
    pup

    pup Light Load Member

    252
    256
    Dec 3, 2011
    n.h.
    0
    the correct method is referred to as the outer base method. A google search will give you printed info on how to do it. You should use a dial type torque wrench to adjust the injectors. It is suggested that you run the engine with the oil supply to the stc valve blocked off to purge any oil from the stc tappets before adjustment. You are bottoming the injector plungers in the cups & loading the assembly to a specific value 125 inlb.
    Celect engines use the same procedure but a different value for the injectors.
     
    pup, Jan 5, 2017
    pup, Jan 5, 2017
    #2
    blairandgretchen and BoxCarKidd Thank this.
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.