Peterbilt doors with no mirrors

I thought most Petes had the mirrors mounted to the cab? I could be wrong though.

 

Not always just can't remember when they started that

 

I think 05 Pete moved the mirrors off the doors.

 

Mark and drill. Peterbilt uses rivets afaik. The bottom sill is angled on the newer doors so you will have to twist the lower bracket to match. I would try put a piece inside the door to reinforce it.

 

379s had them on the doors 389s moved them to the cab. There is several aftermarket companys making conversions to put the mirrors onto the cab on 379s. The mirrors on the doors over time bend the door out at the top and cause it to loose seal. Mirrors on the cab are much better.
That being said, mirrors are rivetet on, hold em in place and drill. How did the previous guy cover up the holes where the mirror used to be? If you remove the inner door panel you might see the old holes.

 

My son has 2 379's both with factory mirrors on the cab not the doors.

 

On the late 2004 379 models the mirrors were moved from the door to the cab.