Post flatbed load photos here V2.0
Discussion in 'Flatbed Trucking Forum' started by leftlanetruckin, Feb 18, 2014.
Page 1112 of 2735
-
Orangees, passingthru69, Lepton1 and 7 others Thank this.
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
PeteyFixAll, passingthru69, johndeere4020 and 7 others Thank this.
-
Going to drop the trailer and they can unstrap and unload this themselves!PeteyFixAll, Orangees, passingthru69 and 8 others Thank this. -
You don't have to catch a nailer with a wedge: you can nail wedges to a 2x6 8' and the nail the 2x6 to the nailer strip.
One of the places I go loads trailers on trailers: ultra high security or I'd have a pic bc of how ####ing dumb the setup is.
Trailer wheels are at the 4 corners, front axle turns front wheels (setup like a hay wagon) big balloon tires. So you chain 4 corners down, then they screw down 2x4s across your deck, in front of and behind each axle; then screw 2x12 pieces 18" long alongside the inner and outer of each tire.
So the 2x12 is higher off the deck and acts as a barrier from the tires all working their way sideways but only a straight 2x4 stops forward and aft motion (disregarding the securement)
Then you tarp it.PeteyFixAll, passingthru69, Lepton1 and 9 others Thank this. -
passingthru69, johndeere4020, Razororange and 7 others Thank this.
-
PeteyFixAll, passingthru69 and Razororange Thank this.
-
-
cke, passingthru69, johndeere4020 and 4 others Thank this.
-
-
cke, SAR, passingthru69 and 4 others Thank this.
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 1112 of 2735