Help with the Cobra 29 NW LTD

Discussion in 'CB Radio Forum' started by Coonass, Nov 9, 2008.

  1. Coonass

    Coonass "Freshy Fresh"

    1,080
    1,179
    Sep 23, 2008
    0
    Can someone tell me why when I adjust my squelch just to where it dosent make any noise I cant recieve a signal from right down the road (they have to be very close too me). When I turn the squelch back to where it makes noise I can recieve a whole lot more. By the way it has been peaked and tuned by a reputable shop so I dont think or hope that would be the problem.
     
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. panhandlepat

    panhandlepat Road Train Member

    3,255
    2,243
    Jan 12, 2007
    0
    Try dialing back your rf gain a bit. Then adjust the squelch
     
  4. tinglish

    tinglish Light Load Member

    163
    52
    Aug 26, 2007
    Cottonwood, CA
    0
    maybe your antenna/coax are bad or just don't match the radio. i have been told that your antenna is 90% of your receive/transmit capability. i have a cobra 29 and it talks pretty good.
     
    panhandlepat and squirrellsgnwild Thank this.
  5. panhandlepat

    panhandlepat Road Train Member

    3,255
    2,243
    Jan 12, 2007
    0
    yep!! been through LOTS of radio problems with my 29 .
     
  6. Coonass

    Coonass "Freshy Fresh"

    1,080
    1,179
    Sep 23, 2008
    0
    The coax was replaced and installed by the same shopthat peaked and tuned the radio. As for not matching I would think the guy would have put the right one, like I stated before hes pretty reputable. I even asked about the antennas I have on there (fiberglass) because I had two firesticks I wanted to put on there and they told me that the ones that are on it were better than the firesticks.
    At times it seems to work better than others. Before this it got out pretty good and still does at times.
     
  7. tinglish

    tinglish Light Load Member

    163
    52
    Aug 26, 2007
    Cottonwood, CA
    0
    well,let me just say that what i DON'T know about cb radios could fill volumes
    but my guy told me that my wilson (not the 2000, just a whip, similar to your firestik) would out perform the fiberglass anyday. i'm a slipseater so my 8 year old cobra has better days than others, and i'm pretty sure any problems are due to the antenna mount getting a better ground on some trucks than others.

    if i was you i'd take your rig to your guy and have him look at it all hooked up on the truck. maybe the deficiency is in the radio of the guy you're trying to talk to?
     
  8. Brickhauler

    Brickhauler Medium Load Member

    411
    142
    Oct 1, 2008
    Elizabeth CO
    0
    Check the antenna mounts on the mirrors. Mine was doing what you describe and the coax was loose and had some corrosion inside where it connects. I replaced the mounting stud and cleaned the end of the coax and not it works good again
     
  9. CURTWAYNE

    CURTWAYNE Medium Load Member

    465
    68
    Jun 4, 2008
    LITTLE ROCK, AR
    0
    My coax came unscrewed from the mount, too. Makes me wonder, did it do it on its own? Or, did it have some help?
    Either way, I was beginning to wonder why my radio just wasn't working as good as it usually does. One day, while I was washing my windows, I just happened to see the coax was almost off the bottom of the mount.
     
  10. DannyB

    DannyB Medium Load Member

    343
    626
    Apr 13, 2008
    Jackson Mi
    0
    Friday night I was sleeping in my company truck at one of our facilities when one of the mechanics crashed a trailer into it. So now I'm using a loner truck while they decide whether or not to fix it or total it out. Yeah, he was moving and pretty much destroyed the entire front end but that's a tale for another thread :)
    My cobra 19 seemed to work fine in my truck, but since I've moved it into the loner, I have to squelch it way up to keep it from constantly hissing.
    Since the previous user of the truck took the antenna from atop the mirror, as well as the in dash coax, I got a new coax and a new Errikcson antenna from the shop. clamped the antenna to the mirror bracket and ran the coax between the door and the door jam.
    I confess, I know next to nothing about cb's. I know the 19 is not the greatest radio out there, but it's all I can afford right now.
    Does anyone have any idea why the radio now spits and hisses constantly unless I turn the squelch way up? Could the coax being pinched in the door be causing this?
    Sorry if I'm not using the correct terminology here.
     
  11. Joetro

    Joetro Road Train Member

    2,416
    2,409
    Aug 23, 2008
    Post Falls, ID
    0
    I would definitely check where the coax is routed between the door and cab. Also, if you bought cheapo coax, that could cause it. Tuning (or lack of) could be another factor.
     
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.