Shifting

Discussion in 'Questions From New Drivers' started by speed_man13, Mar 16, 2007.

  1. speed_man13

    speed_man13 Light Load Member

    50
    2
    Jan 27, 2007
    0
    I got a question on the types of trucks out there. Are there any that have a fully automatic, like a car does, one that you won't have use the manual shifter on your right side. Or are all trucks equipped with manual shifter?
     
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. midget28

    midget28 Light Load Member

    145
    11
    Jan 10, 2007
    What Cheer Iowa
    0
    some trucks use an automatic ive never driven one b/c im still in cdl school or another 2 weeks but we had a recruiter come in and brag abotu there automatic trucks. personally i prefer a stickshift keeps me more alert. They however did explain it was a design that you could choose full auto like a car or semi auto where u tap the shifter up and down to change gears and when in semi auto it wont change gears till u touch the lever. Sounds like a good design but again not for me. That and Trans Am only gets u home 4 days a month.
     
  4. wallbanger

    wallbanger "Enemy of showers everywhere"

    That sounds like an automated trans, where a computer decides (in auto mode) when to shift, and floats the gears as needed. You don't have the floor shifter, instead there is a small column-mounted shift lever.

    Yes there are automatics out there, but you tend to see those more in dump trucks and pop/beer delivery trucks. Garbage trucks too.
     
  5. Gearjammin' Penguin

    Gearjammin' Penguin "Ride Fast-Truck Safe"

    2,702
    8,370
    Feb 18, 2007
    Central AZ
    0
    There's all kinds of trannies out there. Besides the usual 9/10/12/13/15/18/20/I-lost-count-speeds, there are:

    Automatics. Allison has been building them forever. Basically, just like your basic car slush pump. Only really big.

    Automated. These are no-clutch, two-pedal trannies. They shift on their own, but you can still control the gears by pushbutton/paddle/whatever if you like.

    Semi-Automated. Pretty much like the Automated except you still have to use a clutch pedal when stopping and starting. Kind of a halfway solution, and I personally don't see the point. :biggrin_2554:

    So there you are. We'll probably be using one or the other of these things until we're all space truckers hauling square pigs to Neptune.
     
  6. speed_man13

    speed_man13 Light Load Member

    50
    2
    Jan 27, 2007
    0
    thanks for info...and square pigs to Neptune? can u imagine the paycheck after that one? haha

    does anyone know what companies use which ones?
     
  7. wallbanger

    wallbanger "Enemy of showers everywhere"

    USX has been using the autoshifts for some time now (if memory serves, their entire fleet is AS), Kreilkamp , TRL, Central Transport was getting lots in.

    The list keep growing because some ##### in driver retention think that said trans will keep someone in the seat, when their bad treatment of the same driver has them ready to leave! Also, because you don't need to shift, it can help keep Noobs less distracted.
     
  8. rolltide08

    rolltide08 Bobtail Member

    3
    0
    Dec 6, 2008
    Tuscaloosa, AL
    0
    The story I've heard is that the tranny only shifts at the optimal RPM and gives better fuel mileage because of that. I also have to add that when I was in school, we had one auto with the clutch and it would have to be manually "buttoned" up to the next gear when it was cold. Otherwise, it was pretty nice to have in slow traffic.
     
  9. tinglish

    tinglish Light Load Member

    163
    52
    Aug 26, 2007
    Cottonwood, CA
    0
    i have seen but not driven the 2 pedal (no clutch) autos, 12 speed and the drivers that drove them LOVED them. they were NOT rookies, guys with many years of experience.

    i drove a super 10 and straight 10 for 18 months, then moved into a 10 speed paddle shifter and thought it was AWESOME. the paddle shift had a clutch for starting and stopping but shifting was done by flipping the paddle up or down at the right engine RPM. drove that truck almost 4 years till i got a better job. moving back to a manual was a little tricky, took a couple weeks before i got the rhythm back.
     
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.