Had a ait leak in 13 speed pete in knob itself. Mechanic put on used knob and I think its a 15 speed. What can I change as far as the air lines in the knob to make high side on low side of switch and low on high side of.switch to get my top yop 4 to split up and down. Can shift up but going up hills I cant go to high when I come out of 12th I have to go to 10th.
shifting question
Discussion in 'Questions From New Drivers' started by Biggin070908, Feb 23, 2018.
Page 1 of 2
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
-
Bob Dobalina, Lepton1, CrappieJunkie and 5 others Thank this.
-
-
-
Get the right knob. Other wise you will end up with a back box full of unmated pieces. They have a factory lock out for a reason
AModelCat, LGarrison, Broke Down 69 and 1 other person Thank this. -
Wow I would of turned around and took it right back to the shop.
48Packard, Broke Down 69 and jammer910Z Thank this. -
Gotta run. Can still drive it just have to lug it to 1300 before going from 12 to 10, 10 to 8, 8 to 6
-
What color is the splitter? 13 is red, 15 is blue. I would think everything would work the same, but if it doesn't work right tell them to get the right one.
-
The first one was red 13 speed. This one is blue 15 speed. But 13 high sides split. 15 low sides split.
Lepton1 Thanks this.
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 1 of 2