I am planning a move from the Green Bay Wi area to Birmingham Al sometime in early summer. I plan on moving the contents of my house in a U-Haul. I also have a small woodworking/machine shop that I need to move. I have a forklift, the bigger equipment could be loaded directly, everything else would be either on pallets or in crates so that everything would be loaded and unloaded with the forklift. Freight would be all equipment and tools, no household or hazardous. I think I could fill the better part of a 40' flatbed. Would I be better off going through a trucking company, or might an O/O save me some money, and if so, where would be the best place to find one?
Finding an O/O to move my shop
Discussion in 'Ask An Owner Operator' started by mamllc, May 9, 2018.
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
Sounds like quite the project? I have a $ number in mind but you won’t like it. It’s ptobly similar to a Long weeks worth of work? (North of $6000.00 to give you an idea)
Find a broker and let them know how easy it will be for the driver to get in and out. You know, “Strap n Go”.Last edited: May 9, 2018
whoopNride and Mattflat362 Thank this. -
some LTL companies (ABF, XPO, FedEx Freight), will sell you capacity on one of their trucks. They'll drop a 28' trailer in your yard and you fill it up and they come back and pull it to Birmingham on a 'space available' basis, (that is to say it wouldn't get the standard 2-3 day service......it might take a week). Don't know if this will work for you, but it might be worth a try.
-
I did this with my move 10 years ago. Used ABF. Dropped a 28 trailer for 3 days to load, then took it into their system. I had them hold it in a yard for a few weeks until I was ready for it. Then called them and they delivered it the next day. I had 3 days to unload it. Only took a day then they picked it up.
About the smoothest move I ever did. BTW, hired local guys to do the lumping by the hour. For some of the stuff, mounted wheels on the workbench corners, turned them over and filled them up with the stuff from the bench, and secured it. Then wheeled it up the ramp and into the truck. Worked very well. My benches were not attached to any walls so easy to move.Ruthless Thanks this. -
Just got a quick online quote from a place called FR8star, just over $2800 for a 40' flatbed. The ABF-Fed Ex idea is definitely worth looking into. A little harder to load than a flatbed, but nothing a pallet jack wouldn't take care of. Protection from the weather has its pros too, as well as the flexible loading and unloading times. 28' isn't 40, but probably enough to get the worst of the job done.
-
-
Are you kidding me? That sounds like a sweat fest and every strap and chain I got! Ain’t no way that gets complete in under 5 days total. Also a freight claim waiting to happen.
I got something similar to that once. I called the broker within 30 min of ariaval and more than doubled the rate once I saw the #### show unfolding. It all worked out ok at the new rate. At the old rate I would of lost my shorts.
If he gets that moved for under $3k it’s one stupid trucker is all I’m saying? I’m on a regular easy flatbed load right now on less miles kind of the same direction for $4k through a broker.
I don’t know man? Maybe I’m stupid?whoopNride Thanks this. -
$6k sounded cheap to me: moving companies prolly triple that.Tug Toy Thanks this. -
Haha, no man. No way I'd touch it for cheap. I was talking about the "Find a broker..." bit. But then, I guess if OP pitched this to me as a broker, I'd tell him to go find a moving company to do it...
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.