same way as the pipes just run it with a light down to the end of the passenger door and then inside of the "TV shelf" down to the ground and drill a hole to the flore
Fighting summer heat.
Discussion in 'Ask An Owner Operator' started by Snailexpress, Jul 7, 2016.
Page 8 of 9
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
-
Do you have a close up pic of the hole you had to cut in the sleeper for the lines?
What generator are you using again? -
Champion 3100 pure sine wave generator.Terry270 Thanks this. -
It should come with a sleeve to place in the hole that you cut, which prevents it from tearing the foam insulation around the lines. The back of the Volvo has 2 walls with an insulation gap between them. The insulation gets in the way while cutting the hole and can bind up on the drill.
-
RStewart Thanks this.
-
I cut 670 and 780 backwalls to mount window a/c
Make sure that you dont cut in to parts of the savety carge!!
Grinder with a small cutting blade will help
I cut some 670 and 780 backwalls to mount a window a/c -
I will caution those who embark on this journey.....one said that he bought a jug of R410.....I'm assuming you all know that you must be EPA refrigerant certified to handle any refrigerants. If the wrong person sees you it will cost starting at a 25k dollar fine unless that's changed.....just watch your back!!!!
-
-
edit: And R744.
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 8 of 9