Fighting summer heat.

same way as the pipes just run it with a light down to the end of the passenger door and then inside of the "TV shelf" down to the ground and drill a hole to the flore

 

That might work thanks

 

I was going to pm you to see how it's working now. I've got my system at home to install on my KW T660. Couple questions,

Do you have a close up pic of the hole you had to cut in the sleeper for the lines?

What generator are you using again?

 

https://www.amazon.com/gp/product/B00JZQUSAC/ref=oh_aui_search_detailpage?ie=UTF8&psc=1

Champion 3100 pure sine wave generator.

 

It should come with a sleeve to place in the hole that you cut, which prevents it from tearing the foam insulation around the lines. The back of the Volvo has 2 walls with an insulation gap between them. The insulation gets in the way while cutting the hole and can bind up on the drill.

 

A grinder with a small blade will go the job
I cut 670 and 780 backwalls to mount window a/c
Make sure that you dont cut in to parts of the savety carge!!



Grinder with a small cutting blade will help
I cut some 670 and 780 backwalls to mount a window a/c

 

I will caution those who embark on this journey.....one said that he bought a jug of R410.....I'm assuming you all know that you must be EPA refrigerant certified to handle any refrigerants. If the wrong person sees you it will cost starting at a 25k dollar fine unless that's changed.....just watch your back!!!!

 

any refrigerant ? or R410?

 

Any except R134a, R290 and R600a, I believe.

edit: And R744.