I popped a couple of holes in a plastic air line cutting off a bolt and I need to replace about 2 foot of that line. Is there a way to make a splice in that line. I think it is 1/4" brake or air bag line. Any help would be appreciated.
Pastic air line repair
Discussion in 'Heavy Duty Diesel Truck Mechanics Forum' started by inspectweld, Jul 23, 2018.
Page 1 of 2
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
-
I've clamped off the line with vice grips until I could replace it. Just to keep air pressure up
inspectweld Thanks this. -
When you get a chance replace the entire coil plastic colored crap with proper rubber lines. You will find that a few extra feet of them at each glad hand comes in handy come winter.
Carry a spare when you get this all sorted that way you have it on hand.inspectweld Thanks this. -
Is there a special crimping tool I need to install that?
-
No special tools needed. They are push-locks and are easy to change.
inspectweld Thanks this. -
Thank you, I guess I will be able to find it at the auto parts store this morning
-
Ask for a 1/4” union quick connect and that should be what they give ya.SAR Thanks this.
-
Maybe not any auto parts store. Napa usually has a selection of them. Ask for DOT airline fittings. A place like FleetPride or TruckPro would be your best bet. Another option would be a truck stop or any local garage that works on trucks, they should be able to help you out. Never a bad idea to carry a few of various sizes to get you out of a pinch.
-
Look for a Parker store in any city should stock what your after just make sure its DOT. At least get brass or stainless, not that plastic temporary garbage.
6wheeler Thanks this.
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 1 of 2
