Cat c12 compressor

You should be able to get parts for your compressor at a heavy duty parts shop. Somewhere that sells bendix parts and that since I don't think the compressors are actually made by cat anyways

 

Which gasket is it that you need? You should be able to buy like a head gasket kit for it

 

Dont think thats a bendix compressor as they dont have a sandwich plate, the cat compressors have the sandwich plate though, what is you serial number? I have never seen anything other than a bendix on a C12 but never say never...

 

Could also get a sheet of gasket material, and "make" one, just get the correct thickness, and make sure it's compatible with the liquids it will be exposed to.

 

Thats a Bendix compressor... Think it might be a 595 or 594 their called forget. Got a few trucks with them on it. Those are good compressors, pump fast. We have had trouble with the head gasket on them a couple times

 

I stand corrected, it is a bendix with a sandwich plate, the head gasket part number is 175-3171, and the head kit number is 187-1483 it contains valves, gasket, reed valves, etc. there is also an unload kit avalible 187-1481 containing unloader pistons, springs, gasket, etc. These are the only parts I can find availble through cat system.

If it is putting oil into the air tanks it is unlikely a gasket is the cause of the problem, usually the only way oil can get to the air system is past the piston rings in the compressor.