Lite Bug and Flatbedcarrier, you guys are awesome at providing suggestions and answering so many questions throughout this forum. It's little wonder both of you run successful operations. Anyone who sacrifices that much time and effort to help others learn usually carries that trait over into their business practices. My hat's off to both of you.
So you want to hot-shot? (Will be updated/edited frequently)
Discussion in 'Expediter and Hot Shot Trucking Forum' started by HOTSHOTTER432, Apr 29, 2015.
Page 54 of 76
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
This may sound strange to some of you new guys but if I was going to be pulling a 35+5 I’d remove the flip over ramps. Why? Because not only are they to steep, flip over ramps tend to get in the way.
Hers a for instance. Let’s say the front half of your trailer is loaded out with freight and you can’t find any other freight to put with it. With a ramped trailer you’ll want to look for a vehicle to fill the trailer out. With most vehicles they tend to hit the front bumper, or ground effects on the ramp before the tire reaches it. Let’s say you get past that, at the top of the ramp where it breaks over and the deck flattens our many vehicles drag bottom. The last thing you’ll want is to be grinding the bottom of the vehicle in front of the receiver, or Shipper. Can we say insurance claim. Another problem you’ll run into is let’s say you load on a couple of pick up trucks. The one on the rear will likely overhang a little bit and you won’t be able to close the ramps back up. The vehicle will be in the way. There’s a slim chance you can pin them straight up but most of the time you won’t even be able to do that.
And let’s face it, there’s not that many tractors outbreeding to move. Unless you have a account with a tractor dealer anyways.
If I was going to be pulling a 35+5 not only would I remove the ramps but I’d also build what’s called a load leveler for the dovetail. A load leveler basically props up the rear of a load that’s consuming the entire deck space. -
-
I'm trying to follow what folks are talking about but it's difficult at times. No clue what Litebug is talking about trailer wise either. Lolflatbedcarrier Thanks this. -
No I wouldn’t go with a straight 40’ deck unless it was really low profile and could be set up with a good ramp system. Having a versatile trailer is very important. You seen the style trailer we use in the pictures I posted. I’m not saying that’s what you have to get but that trailer helps keep us moving when a lot of other guys are sitting around. Depending on where you live (if there’s toll roads) you probably wouldn’t want a three axle trailer like we run. You can get a 35+5 but in my opinion you’d want to order one without flip over ramps. Instead you could get one 8’ aluminum ramps and have a load leveler built for the back of it do you could haul straight 40’ loads.
Something else to think about is the prices of these trailers. The trailer we use costs us approximately $9,000.00 brand new spec’d out the way we order them. Most 35+5’s are costing in the $18,000.00 range.ChristianOutlaw Thanks this. -
-
Can I get the million liability through one person but insure that truck and trailer elsewhere? The truck will be a 2018 ram 3500 and i figure a new trailer of some length ot another. But...My personal truck, which is a 2014 Tundra, runs me about 2k a year through Allstate (yeah I know it's alot, my son had some accidents in a vehicle I had coverage on which has been removed I believe. It was about 3 years ago but my record is spotless.) I do have a motorcycle through Progressive with no claims.
Also, what is cargo insurance for? Wouldn't the 1 million cover that as well or no?
Thanks for the help in advance. -
-
Lite bug Thanks this.
-
Loadtrail also goes by name Loadmax
flatbedcarrier Thanks this.
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 54 of 76