Truckers Report Jobs

Find Trucking Jobs

Company Driver Company Driver Dry Van Dry Van Flatbed Flatbed Refrigerated Refrigerated Specialized Specialized Owner Operator Owner Operator
More Trucking Job Searches ⌄ Fewer Trucking Job Searches
⌃

d13 volvo fuel pressure issue?

Discussion in 'Volvo Forum' started by Giovanni, Feb 5, 2019.

Page 1 of 4
  1. Feb 5, 2019 #1
    Giovanni

    Giovanni Bobtail Member

    33
    9
    Dec 7, 2016
    0
    Does any body know about volvo d13 (mp8) motor?
    Having a issue with fuel preassure.truck will not go over 1500 rpm
    put a gauge on fuel line reads 60psi constant.ecm reads 90psi.
    truck idles perfect.the minute i get up to 1500rpm it wont give me any more.
    changed preasure censor.did nothing.checked for air leak in return line no air.
    can some body steer me in the right direction.anybody have this issue before?
    Thanks
     
    Giovanni, Feb 5, 2019
    Giovanni, Feb 5, 2019
    #1
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. Feb 5, 2019 #2
    Socal Xpress

    Socal Xpress Road Train Member

    1,855
    1,958
    Dec 6, 2014
    Los Angeles, Ca
    0
    Are you doing this at a stop or driving down the highway? Stick or Ishift transmission?

    If you do this at park......depress the clutch and hammer down. It's been awhile since I driven an Ishift.

    Last question............what's the propose of taking it pasted 1500rpm? Unless you are pulling a mountain(heavy) and you want to maintain speed/gear.
     
    Socal Xpress, Feb 5, 2019
    Socal Xpress, Feb 5, 2019
    #2
  4. Feb 5, 2019 #3
    DUNE-T

    DUNE-T Road Train Member

    6,914
    16,731
    May 10, 2015
    Detroit, MI
    0
    Did you just get this truck or have you had it for a while? Maybe ECM is set up not to go over 1500 rpm
     
    DUNE-T, Feb 5, 2019
    DUNE-T, Feb 5, 2019
    #3
    Matt1924, KB3MMX and Socal Xpress Thank this.
  5. Feb 5, 2019 #4
    Giovanni

    Giovanni Bobtail Member

    33
    9
    Dec 7, 2016
    0
    i can reb motor up well pass 1500 rpm at a stand still.
    10 speed trans.Manual
    have no power pulling up hills on a light load.
    Thanks for reply.
     
    Giovanni, Feb 5, 2019
    Giovanni, Feb 5, 2019
    #4
    Matt1924 Thanks this.
  7. Feb 5, 2019 #5
    Giovanni

    Giovanni Bobtail Member

    33
    9
    Dec 7, 2016
    0
    have boost.ecm shows 90psi
    gauge shows 60psi constant.
     
    Giovanni, Feb 5, 2019
    Giovanni, Feb 5, 2019
    #5
  8. Feb 5, 2019 #6
    Giovanni

    Giovanni Bobtail Member

    33
    9
    Dec 7, 2016
    0
    had truck for 2years
    had injector cups replaced 3 months prior.
    when trying to go up a hill theres no power engine shakes have to reduce throttle.
     
    Giovanni, Feb 5, 2019
    Giovanni, Feb 5, 2019
    #6
  9. Feb 5, 2019 #7
    Giovanni

    Giovanni Bobtail Member

    33
    9
    Dec 7, 2016
    0
    driving down highway
    stick
    at 1400 rpm there nothing after that no power to get uphill.
     
    Giovanni, Feb 5, 2019
    Giovanni, Feb 5, 2019
    #7
  10. Feb 8, 2019 #8
    Stormrider702

    Stormrider702 Bobtail Member

    21
    3
    Dec 4, 2014
    0
    Did you find out what the problem was? I have same issue.
     
    Stormrider702, Feb 8, 2019
    Stormrider702, Feb 8, 2019
    #8
  11. Feb 8, 2019 #9
    mladen86

    mladen86 Medium Load Member

    303
    269
    Aug 23, 2012
    Chicago,il
    0
    When my truck wouldn’t go over 1500rpm problem was speed sensor.
     
    mladen86, Feb 8, 2019
    mladen86, Feb 8, 2019
    #9
  12. Feb 11, 2019 #10
    Rob100100

    Rob100100 Light Load Member

    206
    122
    Mar 5, 2016
    0
    Most likely injectors/cups issue. You would need to have an air test done to determine if that is the issue though. Might want to take it back to the place that did the new injectors and cups. Also might be bad air to air, possibly just possibly your air filter is plugged but that has different problems. Check everything for air leaks or loose clamps first though just to be sure.
     
    Rob100100, Feb 11, 2019
    Rob100100, Feb 11, 2019
    #10
    KB3MMX Thanks this.
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

    • Page 1 of 4