How to Fix - Went in for Alignment and they said - Shackle of Spring EYE

Discussion in 'Volvo Forum' started by JerryD13, Mar 26, 2019.

  1. JerryD13

    JerryD13 Light Load Member

    169
    126
    Oct 17, 2016
    0
    --------------------------------------
    Thanks NazRiza - will consider this option - not sure how long Im going to keep this truck
     
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. nasriza

    nasriza Road Train Member

    2,398
    2,074
    Feb 1, 2013
    Chicago, IL
    0
    If you are not going to keep it long if you make your way to Chicago I can have someone replace them for you for around 700 or 800 just the parts that they are going to replace
     
    JerryD13 Thanks this.
  4. JerryD13

    JerryD13 Light Load Member

    169
    126
    Oct 17, 2016
    0
    ========================================================
    After your information and from others - negotiated - to have the job done for 700...
    + parts -- parts were 200.00 - >> your suggestion to ask about the alignment -
    the * Tech said he would align as part of the install. * but had to ask!!!
    ** asking about alignment is very important ** alignments cost 200/300.00 **

    900.00 to get this job done *** it does take specialized equipment ***

    PARTS:

    2 leaf spring bushings -- at Volvo 50 x 2 -100.00
    4 - Shackles -- at Volvo 25.00 each x 4 - 100.00

    CLICK on link below - will also answer many questions

    How To Tell if Suspension Bushes Are Worn | General Spring

    Many Thanks to you guys !!!!

    =================================================
     
  5. JerryD13

    JerryD13 Light Load Member

    169
    126
    Oct 17, 2016
    0
    =======================================================
    right on the money it was 700 + 200 in parts including alignment

    Thanks!
     
  6. Tombstone69

    Tombstone69 Road Train Member

    1,010
    1,346
    Dec 20, 2018
    Jersey shore
    0
    Good for you, proof that researching a job saves money.
     
  7. Johny41

    Johny41 Road Train Member

    1,192
    1,020
    Feb 10, 2011
    Ontario, Canada
    0
    Is there some special trick or tool to remove the kind of fasteners holding the spring hanger to frame? I'm talking about hex head/nut type huck bolt. I couldn't get them out with impact wrench, had to cutt them off .
     
  8. Goodysnap

    Goodysnap Road Train Member

    3,744
    9,105
    Jul 12, 2017
    0
    Those are not threaded, just knurled and they are a rivet. Cutting is the only way to remove as they are one time use. Smoke wrench or cutoff wheel is the only way.
     
    Tombstone69 and Johny41 Thank this.
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.