I can't get a straight answer on the inside width of the trailers they want. Ive tried calling them and asking around. Just listed as 53'x102" plate trailer required. Short of booking a load and seeing if I get rejected, anyone know for sure?
Anyone Here Hauled Aluminum Cans From Ball In Goodyear?
Discussion in 'Ask An Owner Operator' started by GraniteRiver, May 12, 2019.
Page 1 of 2
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
I've done quite a few Ball loads over the years. Light loads jammed back to the doors with empty cans, usually for beer or soft drinks.
Just smooth walls required. Clean your trailer well before you go in. -
lol no lids ether. let one strap come lose. bam the stack fallsx1Heavy Thanks this.
-
The way I've seen em stacked they don't have lids but are pretty tightly stacked with cardboard separations to keep them from tipping. Still, it's a little scary looking.
-
102 is the width
-
You want to find a dry van trailer with an interior width of 102? Oh that’s right, they don’t exist. Try reading a little bit better, thanks for the non help. -
does not ask for a dry van, ask for 53x102, you read.
-
Plate trailer is a dry van. I’ve never heard of any other type of trailer with that spec.
-
I have picked up here many different times with many different trailers.
Basically, if you have smooth composite wall trailer you are fine. Wood walls you will be rejected. -
Thanks, I’ll book one and see how it goes.
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 1 of 2