Where is everyone #5

Discussion in 'Flatbed Trucking Forum' started by DDlighttruck, Aug 27, 2017.

  1. Hurricane69

    Hurricane69 Road Train Member

    4,421
    59,740
    Sep 10, 2008
    Iowa
    0
    Been sitting so long I got critters hanging on the mirrors.....

    IMG_20190710_214329422.jpg

    Hopefully they get me unloaded before sunrise but it ain't lookin' good.
     
    cke, 1951 ford, wore out and 15 others Thank this.
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. ShooterK2

    ShooterK2 Road Train Member

    5,533
    89,470
    Dec 14, 2012
    Oklahoma
    0
    Nice. Man you make some pretty welds, sir.
     
    cke, 1951 ford, wore out and 10 others Thank this.
  4. MagnumaMoose

    MagnumaMoose Lost or Missing

    6,070
    145,686
    Jan 18, 2018
    0
    You're welcome.
     
    cke, 1951 ford, wore out and 11 others Thank this.
  5. Westbound23

    Westbound23 Road Train Member

    cke, 1951 ford, wore out and 9 others Thank this.
  6. 4mer trucker

    4mer trucker Road Train Member

    8,199
    258,558
    Nov 18, 2015
    0
    That makes quite a few times that Big Red's name's been brought up today.......Picture time

    02f256cabedf6a870cb369039da8a1c9--fat-women-big-people.jpg
     
    cke, 1951 ford, Crusader66 and 10 others Thank this.
  7. tramm01

    tramm01 Road Train Member

    12,677
    164,453
    Sep 13, 2013
    Idaho
    0
    And besides — it’s not French, Owyhee is Hawaiian — common mistake for Flatlanders.
     
    cke, 1951 ford, Feedman and 11 others Thank this.
  8. MagnumaMoose

    MagnumaMoose Lost or Missing

    6,070
    145,686
    Jan 18, 2018
    0
    You got a " Doctors Care " location near ? You'll have to check but you should be able to get the actual test done for around $100 ? You might be able to find a price chart online for a chain clinic near you. Doctors Care includes one or two tests for about $130 all in, including the office visit here.
    Google it.
     
    cke, 1951 ford, Feedman and 11 others Thank this.
  9. ShooterK2

    ShooterK2 Road Train Member

    5,533
    89,470
    Dec 14, 2012
    Oklahoma
    0
    By the way @1951 ford

    9AE6F43A-FBD0-422A-BDE1-FC328CCF3D6D.jpeg

    You’re the only feller I ever knew that welds good enough to just make fine sawdust on the floor....:D
     
    cke, 1951 ford, Feedman and 13 others Thank this.
  10. rank

    rank Road Train Member

    9,918
    113,503
    Feb 11, 2010
    50 miles north of Rochester, NY
    0
    This is a broke axle off a Vermeer TE-330 hay Tedder. Of course it broke at 2pm on July 3rd and the closest new part was in Pella, IA. We couldn’t afford the down time so I welded it. Pretty touchy since the axle had to be straight after and the weld had to be a 90 degrees corner to take the seal and the wheel bearing had to slide over the shaft. The bevel I ground into the axle is weld prep.

    I told the operator I set the over/under on this repair at 1 hour and he took the under. He lost because it’s still going
    A87A7538-902B-4C85-B635-09CC22EDA0DA.jpeg
     
    cke, 1951 ford, Feedman and 12 others Thank this.
  11. Steve from hutch

    Steve from hutch Medium Load Member

    You just HAD to do it. I only used it as a threat

    Steve
     
    cke, 1951 ford, Feedman and 10 others Thank this.
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.