Just loop the coolant lines together, or better yet terminate them at the engine. This would negate any possibility of the hoses leaking at a later time
Transmission oil cooler bypass
Discussion in 'Trucks [ Eighteen Wheelers ]' started by Skate-Board, Mar 24, 2015.
Page 4 of 5
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
I just got out and looked at where that plate mounts. Yet, say in the summer, how high does the fluid temp reach? I justed looped the hose for today and it is running at around 140* with new 50w Mystik synthetic.
-
I looped the line. I guess i do not really need it. I just ran the line from the lower radiator tube to a port past the oil cooler. It is a c15 acert.
-
I want to change my automatic transmission to manual but the transmission I have is air coolant and they want to but a air coolant transmission and do the bypass. Any suggestion please
-
Just two thirty F? You can nurse her into 250 or so if need be. Denver isnt too far off. Just lay off the horsies.
As long temp engine oil temp drives each temp trans agree within a few degrees of one another alls well. -
I have a question I have a 10 speed liquid coolant transmission I want to use the same transmission and bypass it to oil.do you think the tans will get overheated
-
Thank you so much so you never had any problem overheated. I want to change my liquid coolant transmission and do the bypass soon.
-
Thank you so much so you never had anyproblem overheated. Iwant to change myliquid coolant transmission and do thebypass soon.
-
I did notice a rise in the temp on hard pulls but it wasn't anything I got concerned about.
-
Thank you so much for your response.
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 4 of 5