The middle shaft in the picture needs both ends.
They told me, if I replace the joint only, in 6 months I’ll have same thing. So the yoke needs to come out. Problem is when they came to the 2nd...
I just find it really expensive, for something so benign. I understand it’s bad but…. How come no other options exist? Maybe shims around the...
You can’t put some “loctite” and fix it ?
That’s more pictures of the bad one
Went for an alignment, and came out with multiple bad joint and slip yoke… So apparently the yoke needs to be cut out and replaced, because the...
The tires are still on the truck. I’m sure they’ll double, triple check before removal, but I didn’t see anything wrong with the sitting on the...
Here are some more pictures, I had trouble converting them from png to jpeg, can’t upload as png
This is the other area , you can see the difference
This is the tire dirty area
I just installed them last week, did only 3k miles. I’ve replaced one tire first, because it had flat spots it was not legal. I had a loose ubolt...
22.5 low pro.
I think he did that, I didn’t hear any pop noise or anything like that, but he used a lot of grease, I saw that. These people they do that for a...
They used grease when they installed it, and the line is equal apart from the rim. It’s not a bad installation. I may not be an expert, but these...
Yes. That guy who did the test looked also, and didn’t see anything wrong. Both tires have area that don’t make contact. Both tires are new,...
They looked , and it’s all good. The weight is there, didn’t fall. The wheel is tight, no play. They used a machine to spin the tire and then they...
I’ve purchased 2 new steer tires for my truck, and they spin them at the alignment shop, and show me they’re out of round. I’m shocked, Michelin...
I don’t have a pump. I already know that. I’m just looking to see if anyone have the same problem, and have a fix.
The problem is, you don’t have a pump in these transmissions. All they have it’s a cooler filled with coolant.
Care to give some more details. I’m looking to do that. I’ve purcHased an countershaft external pump for Eaton, but no one ever did something like...
