CF 2 40 is a low detergent oil with wiping properties that favour the ring/ liner action of a always pressured roots scavenged 2stroke Detroit....
what part do harmonics play with the slower driveshaft speeds at greater torque caused by more powerful O/O spec engines?? and do the bigger,...
Have a look on the Ritchie bros auction site for past selling prices, you have to register but it is easy they don't want much info. If you want a...
My favorite is the safety CLOWNs who decided that pilot trucks need to sit on the edge of the road with their lights on for the whole show to get...
A left handed cut drill bit sometimes does the trick, Don't use heat until you have to, there is enough carbon in those studs to really harden...
I keep hearing about 8 bag working off road, but have yet to see it, the 40000# version traction sucks beyond belief, 3 different trucks all have...
The C engine has wider rod bearings, and more pollution controls that the early B engines, some B and C cats have a PEEC fuel system, a computer...
If you go to this link, there is a link that I posted to a bunch of pete schematics and info....
I totally agree with that statement. I wasn't in this particular storm, but one earlier in the season and similar "professional" drivers were...
I didn't read the above post all the way through, was going to say the same thing
Did you look at the schematics on the supermiller sight?? tracing black wires is a bit sketchy
this place specializes in little window petes http://courtlandtruckworks.com/ Heard that they are a little pricey KW bunks usually have the same...
Another important step is to keep the trailer maxis charged until the drums cool down, or usually till your air pressure drops. (frozen trailer...
Proggresive shifting also helps. it keeps the gears closer together at the bottom, when you loose momentum faster, ie 1st to 2nd shift at 1100- 2...
Origonally a glider kit was the truck less engine , trans and rear suspension, for rebuilding wrecked or in need of lots of repair, but had a good...
Also often refered to by their make IE the Pete or the Kenworth, or if you want to sound like a moron you could call it "the cab" like the idiot...
If you buy 1 3/8 hose and 1 1/4 hose you can swap the swivel fittings and end up with both hose 1/4 &3/8, if you can use the stiff end in the 1/4...
I agree with owning an older truck, but if you have to make payments and fix it gets overwhelming, and if the job won't make new truck payments, a...
You have the terms backwards the solinoid is mounted to the starter. the relay should be on the firewall near the pass thrus.
1 set works ok until some "new canadian" spins out in front of you and you have to restart. knowing the road makes a big difference too. I know BC...
