That's great you got it figured out, when you said it dissapeared with cruise on I started leaning towards ECM.
Same issues, the truck still sounds like it misses at idle on a cylinder but it makes great power and out pulls most trucks on some mountain...
How many times have you replaced your fuel filter? We went through 5 fuel filters and 2 fill ups with dropping the last 10 or so gallons out of...
That should not be the case, the ECM very carefully monitors TPS input, any misgivings will put in limp mode. The KW mentioned in this thread...
Almost sounds electrical, you said you replaced the injector harness, but did you also replace the pass-throughs in the rocker boxes? Best to...
It is running but I'm still unhappy with the idle. What problem are you having, the smoking or the misfire because they were unrelated issues that...
The great fridge dilemma lol, we ended up going with a deep cycle battery in the side box isolated with a control relay and switching relay. If...
Yep, previous owner went through the entire truck and then parked it so suspension is fresh, when it wears down itll definelty be on the list,...
If they were 120 each I'd just replace the whole arm, cheapest I can get my rods so 298 each, bushings are less than half from the dealer and if I...
I think they're rated to 13 amps at 12VDC, but they dont last at all. We used to use them on one of the racecars and they were always the cause of...
You are correct about there not being voltage there key off, but the way the ECM would fail is fully closed or fully open depending on the...
Come to find out in my haste to get back on the road I didn't set the Jake's, they were too tight and always actuated. I broke an injector...
One of our rigs has 4 batteries as well, with the fridge shutoff I see about .2 volts drop every night, you really dont want to let the battery...
It not revving past 1500 at idle is normal, SID003 is specifically cylinder 3 injector is getting system voltage, best to check the injectors...
The ones I get from the dealer are molded into the arm, I've been thinking of measuring shims and arm length and swapping to the KW style, but if...
Rice Tire, they've been good to me other than always failing me for torque rod bushings. All 8 bushings came out to $400 for the KW excluding the...
I'll see if I can find some of the old ones. They're cracked but not majorily, more cosmetic than anything, its tiny spider cracking no tears, no...
Pulled the rest today, they were all straight using a straight edge. I hear ya, I'm trying to nickel and dime but parts for these are cheap...
Are the atro bushings any better? I'm looking for options because they're a hassle to deal with, quick google search yielded the freightliner has...
The KW has the 8 bag suspension with two per axle, I'm not to sure about the Freightliner but it's a single rod. The dealer calls it the torque...
