Call a drive away service if it’s a runner these companies can be pretty full service permits temp tags all that for a healthy fee obviously...
feels like we are getting scammed here doesn’t it I paid $2.45 on Glendale and 99th yesterday
Are you a Certified DBE already? if not get right on that It’s that time of year already Office of Minority Business dbe contract comprise a...
Thank you
I need a good cummins tech in Phoenix sounds like you have found one? Where can I find him
You don’t necessarily need interstate Authority just a Usdot number if your planning to stay Intrastate You can do quite well running local and...
Your misinformed. Do some research before you make a broad reaching statement that’s untrue also recognize a massive amount of freight is...
Yes If you have an alignment issue you could measure tread and try to match it if the other tire is decent until you get it fixed
Good little motor easy to work on parts are cheap it’s 20 years old so you will be working on it especially with 600,000 miles Personally I like...
Did you figure it out ? 95 international with Cummins should have a diagnostic switch and blink codes ? If it’s intermittent ecm signal it might...
2 drives and a drag chain and grin when you pass the trooper we used to chain 2-3 times each way Caldwell to Hermiston and back
Lots for sale in Salome for cheap nice Little community not to far off the beaten path
I thought he was looking to make some side money. It’s there but not on that load at $2 a mile
Empire cat runs a lot of hotshots to the mines I’d check on that also check with Arizona Farm bureau for insurance there is a agent in Gilbert...
Bad bushing or broken center bolt it will eat one tire measure your axle spacing bet it’s off a little bit one side to the other
50% of sides and rear Don’t forget 12 inches of white only on the top rear corners of tractor and trailer
You have a grace period usually before they suspend you check your states website you probably have 15-days or more before they suspend you. Keep...
I think you need to post a picture was there a lot of paint on it ?
Never used a trail king but used a Flowboy a lot at a job I had for 8 years we always pulled up when the pile got to the belt just so it didn’t...
Not even a hole to lock them shut ? What about the other end of the gate ? Is there a slide bar on both ends of the gates?
