Since I have to pull the head on my 60S i will be in need of more info than I should be asking about on this site. I checked flebay and all...
Just found that thanks thingy, now have to figure out how to use it right. I will check without air to make sure. The last thing I want to do is...
Ouch, I unhooked the coolant to the compressor--- and put the air line back on, didn't think about that one. It starts pushing coolant out with...
Thanks for the tip, not sure I would have rechecked it. This is an old 93 Ford so if it has a valve it very well could be leaking.
This used to be a sleeper but the bunk has been pulled off and the rear heater hoses blocked off at the split. Is there a air valve in the dash...
My 12.7 DDEC II has to come apart. Coolant blowing out of tank, bypassed air compressor today and with in 2 minutes coolant starts overflowing...
Thanks, will check it in the morning. Not sure what brand it is, so tomorrow will bring new light. Thanks for all the quick responses!!!
Would you put a new head gskt on the compressor like an engine or get a reman compressor? Do the heads warp and crack like an engine or just...
Thanks for the replies, this had a sleeper but the p.o. removed it and added a dump bed. I hate that part but it was a really cheap dump...
I know the 4 wire switch in the thermo housing sends signal to air switch on my old one, does it also sent the temp to the gauge? I replaced mine...
Dang, sorry bout that, it's in a 93 LTL 9000 Ford, 60 S 370/430 set at Detroit for 425 to 1800, 400 1800 to 2100. Put a water pump in last fall,...
On the way home Thursday night I smelled coolant, pulled over and checked, recovery tank was cracked and blowing coolant out. The cooling fan has...
Just looking for some answers about a 60 series and found this site. Looks like a great place, I have a LTL 9000 dump so no OTR for me, just...