When I was OTR here in Oregon~the shower me state, we used 17 for East~West traffic and 19 for North~South as I recall. Been off the road...
Come Christmas or his next birthday going to get him an Astatic RD power mic. Have one of these on my 538W and it performs very well. Wiring is a...
Excellent post M818! Thanks! As for myslef I've been running amps since the '70's. Not having the broadcast expertise of the ham folks nor...
Okay, final post on this radio. I successfully replaced the final (2166) and testing I now get faint white noise through the speaker (static) but...
I hear ya Rat, I normally go the replacement route on small ecletronics, but as time goes on I like to take things apart and just see what I can...
I figured as much, thanks for the confirmation WA4GCH Prosit!
The reason I'm sticking with the 510/520 is that the conversion van's headliner consol juuust fits this radio's case. If I went with another maker...
I got the power transister out and I need to clean up the circuit board but that I'll have to do with some wire and my soldering tool as no one...
Yes, the central hole has a threaded screw and nut holding it fast to the rear of the case. I am a bit confused though does the heatsink compound...
Got a genuine Mitsubishi 2166 on the way, and as I don't want my friend to wait so long I found out Uniden sells factory refurb 520's for $35 so...
My mobile is a Uniden 538W this, with a 250w brick and a 5ft Wilson has done me loud and proud on the open road, put the radio on a Gamber sliding...
I've been burner by Copper before (some call them Crapper) with incorrect items being shipped, so I'm dubious about their integrity. Yesterday I...
Just as this is kind of a gift for my friend when I get it done, this project will give me experience in dealing with desoldering components from...
Is it certain that the 1969 will work properly with the little Pro520xl?
Hi folks, This may be beyond any novice repair but I got this radio for free so if it's within my capability I'd like to see if I can get this...
I've got a bud with a kaput 510 and the mic connection is a six pin half moon. A replacement (I was hoping 'till I found it was kaput) I got for...
Now, if I could just find some mini 8 coax for my friends' van project that'd be great. This #### consumer desert I live in [IMG] forces me to...
All Right! Got a pair of those 12v w/resistor LEDs in and it's workin' :biggrin_255: Thanks for all the friendly helpful responses! [IMG] [IMG]
Thanks xPosTech for your patience and great helpful responses. :) That link is going to be right handy if I ever get more back counter space for...
