I’ve got to replace the rubber bushings on the stabiliser bars where they go onto the alloy pedestal. Can you just remove the pedestal caps and...
Yep, still around and driving and yes that’s my video.
It’s going ok. It’s done a lot of miles so I bought a spare engine that I’ll do up in my spare time.
[ATTACH] Haven’t posted in a while, but here’s one you might like. My 79 ton KW with a 200 ton super quad going past with a load of iron ore.
I just check the u-joints by jacking one wheel up and releasing the brakes. Chock the steers of course unless you're under a trailer. You can soon...
Ideally it would be great to have a pre-lube oil pump like on this CAT 994 [MEDIA] My local Caterpillar dealer has got a 12 volt pre-lube pump for...
My KW has got 2 valves and so has my converter dolly. All Aussie KWs run 2 valves. The best way to adjust them is, disconnect one valve, set the...
Having a look at the spare 3408 I bought a few weeks ago
Nearly all the Kenworth-specced 3408s in Australia had airstarts, the one on the truck is a StartMaster and the engine in the pic is Ingersoll...
I've already got one. It'll eventually probably go into my KW. Bolt straight in because there's already a 3408 in there. The engine I bought...
Well, I fixed it. I bought another air fuel ratio control off this engine. Expensive air fuel control because I bought the engine as well.[ATTACH]
So which is better, Euro Volvo or American/Australian Kenworth? I know which one I would have and I've driven both. Fancy sleeping in a tiny...
I'm still unloading at an iron ore mine called Tom Price in the the North West of WA, so it isn't fixed yet. I've got to stack my trailers up and...
I'm pretty sure one of the screws gives it more fuel and another one adjusts the delay from when the turbo spools up. I had the same trouble a few...
My Caterpillar 3408 has suddenly started blowing heaps of black smoke when I put my foot down, meaning that the air fuel ratio control has stopped...
I found a small leak from the exhaust port of the brake treadle valve, changed the valve and that's improved it a bit, but there is still a leak....
Yeah, I'm still here. Just been busy, that's all. Haven't uploaded a new video in a while.
Thanks for the compliment, I'm glad someone appreciates it. Yeah, they were tower crane sections. One of the lightest loads I've hauled, often the...
Nah, Swan Hill too far. Like I said before, hook them up at Moama, only 200 kms from Melbourne. There's even at least 2 dedicated hook up yards...
She got fired. Also Shell who were a sponsor of Proserpo Productions withdrew because it went to air and they had to find another financier.
