If the exhaust gases exiting the egr cooler were hot enough to melt the iron they would be hot enough to melt the hose would they not. I have had...
Well not really. IMO you can never over filtrate. The cleaner fuel getting into the cylinder the better. Hence the FASS fuel polishing system. The...
Front of the engine at the top, ahead of the valve cover. There is a silicon hose, either green colored or if the paint has come off it will be a...
No, the filter flow is as follows. 1st. The davco, currently with a 50 micron filter as per advice from volvo dealership. Davco however call for...
Actually I have three filters. The davco, then the volvo water separator filter ( which I am told is 25 microns) then the volvo long life filter...
Got that and know that but as I said, volvo told me to use the 50 micron not the 25 micron.
Also, check you don't have leaks around the outlet of the turbo to the intake manifold to the CAC. There are o rings there and you will get blow...
Davco says to use a 25 micron one ( fleetguard fs19765 ) but recently a volvo dealership told me to go to a 50 micron one ( fleetguard fs19729 )....
Test CAC, have the overhead run by someone who knows what they are doing, put the correct volvo fuel filters on, plug the egr cross over pipe and...
Code showing on Driver Display is.. MID 146 SID 13 FMI 3 Electrical Fault, Heater Exchange Temperature Sensor, Fault Active i have heat blowing...
What? i have an electrical code. Nothing to do with coolant circulating around the heater core.
Well I like my D12. I've had it since 559k and now has 703k. Not without problems but all have been age related, like gaskets etc..and the dreaded...
As title suggests. 07 780 with D12. Can anyone tell me where the sensor is located? It's not the sensor behind the four slats in the center dash...
Will do, thanks.
Actually the gauge now continuously reads 100lbs.
Sorry, cluster check shows no faults.
Thanks Pablo. I got a pressure range between 35lbs and 100lbs. At idle it is now showing 60lbs and at 1500rpms I get 100lbs. With just ignition on...
Can someone tell me where it is. My pressure gauge is reading erratically. ECM has not derated the engine or thrown any codes, so figure I would...
I've still not pulled the trigger on this but I am speaking to a winegard tech tomorrow, so will post what he advises. If it doesn't work behind...
Your missing the point....when you buy fuel in IN you just minus the .16 to get your after tax price. Some people add .16 and .11 together and...
