Maybe it's not actually the governor that's bad, maybe your gauge is reading wrong.
Go to SAFER Web - Company Snapshot and search for the name epi. There's about 10 or 12 different companys. The one Chinatown gave you is inactive.
If you are operating under someones authority you also need to be on their liability insurance.
Sounds like it could be your ignition switch. Take a test light and see if it's shutting off power with the key off.
Ancra has lopro part # 49207-187-XZ
Sometimes that happens when the front springs on the steer axle are wore out and start sagging.
Pretty common for the old iron to only have maxis on 1 axle. I have a 90 and a 84 and they both only have them on the front drive axle. They're...
The clamp on the maxi is probably riveted, not bolted.
You don't have to buy it premixed. You can mix it yourself by adding equal amounts of distilled water and full strength antifreeze.
Did you buy premixed antifreeze or full strength? If full strength you need to mix 50/50 with water. Also should be low silicate antifreeze.
There's usually some on ebay, or most of the chrome shops have them.
I think most of them are round like they were in the early 80's
They are making aftermarket ones now, but the original ones are getting hard to find and expensive. Even the aftermarket ones are around $600 for...
Could be a bad ground somewhere, a bad ground can cause wierd problems.
About half the lot at tomahawk in Watkins is blocked off, but usually still some parking. Great food and full bar across the road at lulu's.
Looks like your heater core is leaking and steaming up the windows.
Kerosene is basically #1 diesel fuel so it holds up great.
Anyone know the part numbers for the clamps and holders?
Mytee products has blue, red and green 4" straps.
Nebraska, Iowa, Missouri, and Kansas
