I have a set of heavy duty ramps for sale. Each ramp section will hold a 30,000 lbs. axle weight. Each ramp section doubles as a bridge. They...
It is the "fitting" and "fit" I am asking about. There does not seem to be a standardized definition for what fit is. To throw your chains on...
This is a thread about fitting your chains, making sure an unidentified chain fits your particular tire. This is not a thread about how to...
I read all the time the wise advice to make sure your snow chains fit, but no one ever says what a proper fit is. What if you pick up a set of...
How much thread can you see that those locking rings are spinning around? Are they locked together towards the engine. towards the transmission...
Are you saying both rings are stuck together? The should be over .5" or 1.0" apart. I would have to look at the video again for the greatest...
Once you loosen the locking ring nearest the engine, moving the locking ring nearest the transmission will move both locking rings at the same...
Never mind, a long screwdriver, a hammer and something 1/2" wide is all you need. It is as easy as the video shows it to be, so easy, in fact,...
I had a Lipe Clutch installed a couple of years ago. At the time, I didn't realize there was a tool that came with it. It stayed back at the...
I run two GPS' of different manufacture While I have an Atlas, I haven't opened it in years.
If you are being paid to tarp, tarp, I don't understand the dilemma.
Uhhhh, I posted that I had done this and it worked the other day. Just yanking your chain. I appreciate all the help.
I agree with you, I should have one and I should learn to use it. I have one that you ground and the other end is a sharp point that lights up....
The head of the bolt is past the opening, so the wrench has to be bent. I just bought two wrenches, one a ratchet and another closed star, both...
I'm going to have to get some sort of special tool. There is no wiring in the way, it is a tight fit between the starter, engine and frame. I...
Another question, there are three bolts that hold the starter on. When I took the starter off, the topmost bolt had backed out and had fallen...
What you have listed as the overcrank and the magnetic switch are the two special connections I don't think I could screw up. The positive...
All the wires on the solenoid are red, except one, which has a white piece of tape on it. One of the red wires is labeled "starter," I don't know...
Just as a general observation, there is a white wire on the starter post and a black wire on the solenoid post, which may indicate that the hot...
