Is it possible the bunk switch was hardwired or bypassed at some point? The a/c should have pressure switch that doesn’t allow clutch to engage...
RTLO18918B will swap in no problems just make sure you get as similar a trans as possible eg bellhousing and yoke. The pto shouldn’t be a problem...
Check A box countershaft play might just need to re shim it
Pilot bearing doesn’t spin when clutch is engaged and throw out bearing noise wont change with load or unload it’s either tranny or diff related...
Take some pictures I’m having trouble understanding exactly what’s slid where pretty simple setups unless cantering bolt sheared not a whole lot...
I’d put the truck on jack stands and get a friend to put it through the gears while wheels are off the ground, and get the speedo to where it...
That last sentence was supposed to end with “!” Not “?” should of proof read better.
Well @SmokinCAT I guess that’s all the information a man will ever need! Last question however when you say “you can advance pump timing a bit”...
Wow that’s almost 600hp!! Are the injection pumps identical between highway and industrial motors? Eg barrels and plungers, timing advance, and...
Thanks again @SmokinCAT !!!! Will this arrangement make me lose low end lugging power, what kind of hp can I expect? What are advantages of lower...
Thanks @SmokinCAT Do you know what part number steel crowned pistons are for my motor? What compression ratio should I get? If you read my thread...
Hi everyone I'm looking to build my 3406C serial 3zj42952. Ive read a lot of good advice on forums like this one and "thedieselgarage". however...
Just a clarification when I said “suggestions for gifted mechanical CAT mechanics” I wasn’t referring to myself, I meant shops I could call to...
The 379 short hood fit fine on my 377 sfa but you do need to do some modifications. Find a truck at wrecker so you can steal cab mount brackets to...
Will the hot timing of the old style pump burn holes in my pistons? I’ve read the lower pop off pressure is less than advantageous for big power...
@SmokinCAT do you have any suggestions for gifted mechanical CAT mechanics? I have been reading through forums like this one and TDG and have had...
