Elmer's sucks and so do the Walgreens appts. Trust me. Been there done that. And if you're going with the mega who usually has that account every...
https://www.cgj.com/store/category/volvo-truck-radiators/
Progressive offers direct. Just call the number to start a quote
That's not a flat floor
If you can get a towel and gasoline. Pour a little on the towel and put it over the intake. Make sure you have it in a way where it's not possible...
I do it regularly. Simply because it's cheaper, in fact much cheaper than the Pilot and Petro in town and it's right by my house. Since I drop my...
I used to run, (still have it) a Samsung laser that got the job done really well. Especially useful if you had to print lots of pages. In the...
Get a meter and see if you're getting 12V out of the fuel shut off solenoid. Additionally you can take a live hot 12V and put it to that post...
Change the entire harness. Easier than going through looking for breaks, plus you'll get all new coonectors, boots and pass thrus.
Check the pump pressures. Easy to verify. If you're turning out 60+ on an N-14 it would have grenaded long ago. Check that gauge for accuracy and...
Generally I just turn mine on after wash out and let it do what it's supposed to do. Best to find out any issues prior to loading. TK has in cab...
Even more reason you should have just bought a new harness. Chasing unknown wires is just more time wasted.
Just changed one yesterday on one of my trucks. New from cummins is $900 plus. Here's one for $780. 3411481 Cummins (1996 & Newer) N14 CelectPlus...
I did it for a few years. If you don't mind babysitting adults and being a personal taxi, it's not too bad. Gotta be a people person though...
255 is the amount of times its been logged in the ECM. That's the max input though so as you're running those codes are constantly logging....
Check the water temp sensor make sure it's good as well. If it goes bad it defaults to "fan on" Easiest way to check what's giving it a signal is...
YMMV, but I haven't had much luck with that starter on an N14 First one kicked out the starter gear while my driver was idling in the cold a few...
48' Old Perdue trailer
My rear axle sits forward of the rear of trailer about feet. What's the purpose of having a dump on each axle?
Does that apply with a forward spread as well? Also, how do you run it to a switch in the cab?
